1.Picture of concrete brick making machine
2. Introduction of Concrete brick making machine / concrete brick machine:
Good Design:
A,The balance system adopts four-pole guarding way with extended bush to ensure the exact movement of mould.Gear and shaft balance system can make male and female mould move stably.
B.The way of feeding is revolving,convective and compulsive to ensure block density and reduce feeding cycle. Gear driving mode of feeding is more steady.Feeder moving is two curved arms drived by two cylinders,which makes feeder move quickly,durably,and steady.
C.Stacker is controled by frequency conversion to adjust speed.The movement of stacker is flexible and steady.
Hydraulic System:
The hydraulic system adopts proportion direction valve.The valve can adjust flow rate and buffer cylinder.Therefore,it can protect cylinder and extend life,and make operation steadily and quickly.
Vibration System:
The vibration adopts frequency conversion technique.The assembly is oil immersed vibration.This improve high speed loading and makes concrete liquefied and air-outed.The five advantages is vibration assembly synchronization,soft starter,densify block,electric saving and quick moulding.
High Automatic level:
Using Japanese Omron sensor as signal source and Germany Siements PLC as central processing unit to make oil system,air system,electric system and machanical system to be one part.The plant can work automatically and cyclically.Our technicians put fault diagnosis,problem alarming into computor by safty logic control.The screen will show fault and methods to client if there is some problems.
Steady&Safe System:
It adopts separation of high and low voltage electricity,low voltage controls high voltage technique.This will solve problem of high voltage interfere and ensure gaining of exact signal.It is safe for people and machine.
3. Capacity For concrete brick making machine
Main Technical Specifications |
|
Standard |
JC/T920-2003 |
Vibration Frenquency |
3500 cycles/minute |
Vibration Pressure |
70KN |
Production/mould |
Hollow block (390×190×190mm) 5 Pics/mould |
Hollow block(245×115×90 mm) 16 Pics/mould |
|
Solid Brick (245×115×53mm) 32 Pics/mould |
|
Paver brick(200×100×60mm) 18 pieces/mould |
|
Cycle Time |
15-25seconds |
Production/day(8hours) |
Hollow block(390×190×190 mm) 5800-6300 Pics |
Hollow block (245×115×90 mm) 18500-20000Pics |
|
Solid brick (240×115×53mm) 45000-57000Pics |
|
Paver brick (200×100×60 mm) 21000-23000Pics |
|
Motor Power |
29.7KW |
Water Consumption |
5-9T |
Number of workers |
6-10worker |
Space of Ground |
3600m2 |
Gross Weight |
10T |
Machine Dimension |
3000x1900x2930mm |
Pallet size |
1100×700×30mm |
Main materials |
Cement,crushed stone dust,gravel,sand,coal fly ash,iron/aluminium dust,crushed cinder and some industrial wastes |
Products of machine |
Hollow blocks,Solid bricks,Pavers,Kurbstones,Slope blocks,slabs, interlock bricks and so on. |
4. Raw materials of Concrete brick making machine / concrete brick machine:
5. The brick samples of Concrete brick making machine / concrete brick machine/ brick machine
6. More Products to Choose
7. Certifications Of Products
8.Our foreign customers
Our Services
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, plan
The condition of build factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) 24 hours service
(4) Welcome to visit our factory and production line anytime
(5) Introduce the company file, product categories and production process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side.
(2) Set up, fix,and operate
(3) Will not train the operator until they are satisfied at clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time,keep well communication with each other.
If you have any interest for our products please don’t hesitate to contact us, we are very glad to serve you!
We load the machine into the containers directly, and then send to you by ship. If you buy the small type machine we will help you to share container with others, then you can save cost on the freight.
Maybe you don't know how to choose a suitable type machine, please follow with me.
1.Do you want a semi-automatic machine or automatic machine?
2.Do you already have land or plan to buy new land ?
3.How much do you want to invest in this project?
4.what kind of block do you want to produce?what is the size?How many pieces do you want to make in 8 hours?
Please feel free to contact me at any time.