QD type double girder bridge crane with trolley winch is mainly composed of bridge, running gear of crane, trolley and electrical device, etc. It is divided into two working classes:A5 and A6 according to the use grade and load-up condition.
There are three kinds of method for entering the platform of cab:from the side, from the end and from the top.
Safe slide wire or angle iron can be used for electric conduction of the crane; it can be either at the opposite side of the cab or at the same side of the cab.
Operation of the crane shall be finished in the cab completely.
Features:double beams, single or double trolley with main and aux hook, electrical system adopts Schneider, Mitsubishi, Siemens well known brand name.
QD type double girder bridge crane' s main parameters in follow:
QD type 10t double girder bridge crane with trolley winch | |||||||||
Span | S(m) | 10.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 |
Lifting height | m | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
Lifting speed | m/min | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 |
Trolley speed | m/min | 43.8 | 43.8 | 43.8 | 43.8 | 43.8 | 43.8 | 43.8 | 43.8 |
Crane speed | m/min | 90.7 | 90.7 | 90.7 | 91.9 | 91.9 | 84.7 | 84.7 | 84.7 |
Lifting motor | kw | 17 | 17 | 17 | 17 | 17 | 17 | 17 | 17 |
Trolley motor | kw | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
Total weight | kg | 13640 | 15520 | 18350 | 20340 | 22750 | 27140 | 30530 | 33620 |
Max Wheel Load | KN | 101 | 108 | 117 | 122 | 130 | 140 | 150 | 160 |
Track | P43 | P43 | P43 | P43 | P43 | P43 | P43 | P43 | |
Main dimension | mm | 10.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 |
Rail top to main top | H1 | 1876 | 1876 | 1876 | 1876 | 1876 | 1926 | 1926 | 1926 |
Rail top to hook centre | H2 | 602 | 602 | 602 | 602 | 602 | 552 | 552 | 552 |
Wheel base | W | 4050 | 4050 | 4050 | 4050 | 4050 | 5000 | 5000 | 5000 |
Crane width | B | 5704 | 5704 | 5704 | 5882 | 5882 | 5948 | 5948 | 5948 |
Hook left limitation | S1 | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 |
Hook right limitation | S2 | 1300 | 1300 | 1300 | 1300 | 1300 | 1300 | 1300 | 1300 |
Trolley gauge | K | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 | 2000 |
Note: Control mode for cab operation |
Henan Dejun Industry Co., Ltd is specializing in hoist, crane, winch, aerial work platform and crane parts in the world! is a specializing in hoist, crane, winch, aerial work platform and crane parts in the world!
A: 1 Set;
2. Q: What's your package?
A: Main body in plywood box or in plastic woven cloths; Spare parts in plywood boxes;
3. Q: What's your delivery period?
A: Within 10/25/40 days after your prepayment received; exact period should be based on detailed requirements and actual period;
4. Q: What's your warranty period?
A: 12 months from cranes accepted;
5. Q: Do you have engineer oversea installation service?
A: Yes; We have;
6. Q: What kinds of products do you have?
A: All kinds of industrial electric winch (especially non-standard); Overhead Crane; Gantry Crane, Electric Hoist; Screw Hoist; Radial/Flat Gate Hoist; Steel Gate; etc.
7. Q: Could we buy spare parts in local once they are out of work?
A: Our main electrical parts brand is Siemens or Schneider brand; it's very easy to buy all the world. But if there is any difficulty, we can post to you by express, such as DHL, UPS, FEDEX, Aramex, etc.
8. Q: Do you provide lift tools?
A: Yes, we can provide any kinds of lift tools such as lift sling belt, lift clamp, grab, magnet , pulley blocks, hook, lock catch, wire rope, fiber rope, etc.
9. Q: Could your winches drag inclined?
A: Yes, our electric winches could drag horizontal, drag inclined, hoisting vertical.
For quick quotation, please fill in the following information:
1. The lifting capacity of the crane
2. The lifting height (from floor to the hook center)
3. The span (the distance between the two rails)
4. The power source in your country. Is 380V/50Hz/3P or 415V/50Hz/3P?
5. Your nearest port