QBF cast iron pneumatic double diaphragm dry powder pump
Brief introduction
Introduction:
QBF cast iron pneumatic double diaphragm dry powder pump is the third generation of new diaphragm pump specially designed for powder transmission. It has the advantages of high efficiency, wide use and no blockage.
Working principle:
In the two symmetrical working chambers of pump, there are two elastic diaphragms fixed in one body by connecting rods. After the compressed air enters the intermediate, it promotes the diaphragm to move synchronously. When the piston reaches the end of the stroke, the valve will automatically introduce compressed air into another working chamber and push the pump to move in the opposite direction, thus forming a synchronous reciprocating motion of two diaphragms, resulting in a change in the volume of the working chamber, forcing the two one-way ball valves to open and close alternately, so that the powder can be continuously inhaled and discharged. By borrowing the air flow from both sides of the conduit, the transportation can be smooth and avoid blockage.
Advantage:
1. No dead point operation, even if the intake pressure is very low.
2. The sealing is good, the powder does not leak in the whole process, and the operator can be avoided to contact with the powder.
3. Designed with an airflow induction system to prevent the possibility of powder filling the pump cavity.
4. The motorized gas of the fluidizing gas and the pump can be separated to avoid contact with oxidation and deliquescence of the material and air; the fluidizing gas can be separately purified and dried (in contact with the powder), or other gases (such as nitrogen) can be used. gas).
5. Economical and practical, easy to install, unlike expensive traditional large pre-installed powder delivery systems.
6. Lightweight and easy to use, it can be easily moved anywhere. Ready to use, free installation and commissioning;
7. Minor material agitation, avoid material heating, no spark during operation, no heat generation.
8. Mild internal shear force to ensure maximum integrity of the material is not affected.
9. Bolt fastening structure, bolted to achieve leak-proof integrity.
10. Various materials, the pump body is made of cast steel, aluminum alloy, stainless steel and engineering plastics.
11. It can transport powdery, light, dry and easy-flowing powder with a bulk density of 80~800kg/m3, which is widely used.
Product application:
Fine chemicals: pigments, dyes, coatings, carbon black, titanium powder, iron oxide, ceramic powder, heavy calcium, light calcium, bentonite, molecular sieve, kaolin, silica gel powder, activated carbon, acid, alkali, lime, etc.
Pesticide ore: urea, ammonium bicarbonate, soda ash, solid pesticide, tungsten powder, pesticide auxiliaries, copper concentrate powder, coal powder, phosphate rock powder, alumina powder, etc.
Building metallurgy : fiber powder, cement, clay, yellow sand, quartz sand, clay powder, silica, limestone powder, dolomite powder, wood chip powder, glass fiber, silica, talcum powder, metal powder, dye powder, etc.
Daily food: flour, starch, cereals, milk powder, yeast, sugar, monosodium glutamate, crop powder, washing powder, etc.
Other industries such as automobile, paper, medicine, water treatment, etc.: powder coating, powder metallurgy parts, paper powder, tablet powder, raw material powder, sodium hydroxide, bleaching powder, sodium peroxide, etc.
Product details
Working Principle: |
Double Diaphragms, pneumatic |
Main applications: |
Chemical, Foodstuff,etc. |
Driver: |
Air operated |
Max.permissible fluid temperature: |
100°C(212°F) |
Type of connection: |
Flange, Thread, Quick Coupled. |
Installation position: |
Connect to compressor |
Pump body mateiral: |
CI, SS, AL, PP, PVDF, PTFE lined. |
Diaphragm, ball, ball seat mateiral: |
F46, PTFE, NBR, Santoprene, EPDM, etc |
Maximum drive rating: |
2~7bar |
Maximum caliber: |
100mm(4inch) |
Maximum head: |
10m |
Flow rate range: |
0~3200Kg/h |
Performance data
More pictures
>>>View more diaphragm pump pictures, pls click it.
FAQ
Q: How about delivery time?
A:1. It is about 3-7 working days if products are in stocks.
2. If product are out of stock, The delivery time depends on the quantity.
Q: Could you provide samples?
A: Yes, of course. We will send samples to you against advance deposit, but the price of sample pump and the freight charge is paied by your side.
Q: How about product problem solution?
A: If you can’t solve the problem in your local, please send the product to us, we will repair it, then back to you.
Q: What is your payment term?
A:T.T, Western union, etc.
Pls click ↓ " Send " ↓ with your requirement.