0.3mm 0.5mm 1.0mm thickness
Thickness, inches | TS, ksi | TYS, ksi | Elong. in 2″, % | CYS, ksi |
0.250-6.000 | 35 | 19 | 10 | 10 |
Standard Sizes
Thickness | Size | ||
.250, .375 | 48″x 96″ | 48″x 144″- | - |
.500, .625, .750, 1.000 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
1.250, 1.500, 1.750 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
2.000, 2.500, 3.000 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
3.500 | 48″x 96″ | - | - |
4.000 | 49″x 84″ | - | - |
5.000 | 49″x 72″ | - | - |
6.000 | 49″x 60″ | - | - |
Special Inquiries: For thicknesses over 6 inches, widths over 60 inches, and non-standard lenghts.
Tolerances
Thickness
Thickness – maximum variation in gauge within a plate ± 0.010 plate to plate variation | |
Specified thickness, inches | Tolerance ±, inches |
0.250-0.750 | 0.010 |
0.751-1.250 | 0.017 |
1.251-2.000 | 0.025 |
2.001-3.000 | 0.050 |
3.001-3.250 | 0.065 |
3.251-3.500 | 0.080 |
3.701-4.000 | 0.110 |
4.001-5.000 | 0.125 |
5.001-6.000 | 0.135 |
Width and Length Tolerances
Specified | Specified width of length, inch | |||
Up thru 10 | Over 10 thru 48 | Over 48 thru 72 | Over 72 | |
Tolerances, inch + | ||||
0.250-6.000 | 3/16 | 3/8 | 1/2 | 5/8 |
Flatness Tolerances
Specified | Deviation from flat*, inch | |||
In any 1 foot | In any 6 feet | |||
Guaranteed | Typical | Guaranteed | Typical | |
0.250-1.000 | 0.005 | 0.003 | 0.015 | 0.007 |
* Deviations from flat are measured from a straight edge placed on the surface of the plate.
Finish: The side suitable for tooling uses is stencilled. The opposite side is equal or superior to a mill finish.
Packing: Conforms to requirements of carrier through which shipment is made. Both domestic and export packing available.
· AZ31 / AZ31B – Rod, Tooling Plate
· AZ31B-H24 – Spec Grade – Sheet & Plate Sheet, Plate
· AZ91C – As cast or heat treated – Castings
· AZ91E – As cast or heat treated – Castings
· AZ80 – Bar
· EV31A – As cast or heat treated – Castings
· ZE41A – As cast or heat treated – Castings
· ZK60A – Bar, Sheet, Plate
Extruded Magnesium Alloys and Forms Available
Magnesium Plates OEM | High Purity AZ31B AZ91 WE43 Magnesium Plates,magnesium sheet |
Application | CNC engraving |
Shape | sheet/plate/board |
Chemical Composition | AI:2.5-3.5%;Zn:0.7-1.3%;Mn:0.20-1.0%;Mg:Balance |
Process | Extruded/Casting |
Size | thickness from 0.5 to 7mm; Max width is 600mm; Max. length is 1200mm |
Other name | Magnesium Alloy Rod Bar |
Type | MIC,High potential,AZ63C,AZ31 |
Certification | ISO9001,ISO14001,EJ/T9001-2005 |
Packaging | In Carton /wood crate/on pallet |
Product Keywords | Pure magnesium plate / 99.9% Mg magnesium sheet 3mm 7mm 10mm thickness |
*** Sheet, Plate, Bar, Castings, Forgings, Extrusions *** | |
AZ31-TP Tooling Plate From .250″ to 14″ thickness | AZ31B-H24 Sheet & Plate From .020″ to 3″ thickness |
AZ31B-O Sheet & Plate From .020″ to 3″ thickness | AZ31B-F Round Bar From .250″ to 14″ diameter |
ZK60A-T5 Flat Bar Many sizes!! | ZK60A-F Flat Bar Many sizes!! |
ZK60A-T5 Round Bar From 1″ to 15″ diameter | ZK60A-F Round Bar From 1″ to 15″ diameter |
AZ61A-F Round Bar From 1″ to 3.125″ diameter | Forgings, Castings, and Special Extruded Shapes |
|
We also have other grade plate:
WE43
WE54
WE94
AZ91D