Pulse Filter Cartridge Dust Collector Bag Welding Fume Plasmon Central Industrial Dust Collector
HMC series pulse cloth bag dust collector is a single type baghouse dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc.
Operating Principle
When the dust gas enters into the cloth baghouse dust collector from air induced system, due to the decrease of wind speed, the dust particles with a large proportion settle into the ash hopper, and the lighter dust depends on the air induction to reach the surface of dust removal filter bag.
The filter bag of dust collector generally uses needle felt as the filter carrier, and the filtration accuracy can reach <1um. The dust is blocked on the surface by the filter bag, and the dust gas is purified through the filter bag. With the increasing of time, more and more dust is filtered on the surface of filter bag, so the resistance of the filter bag is gradually increased. In order to make the dust collector work normally, when the resistance rises to a limited range, the electronic pulse controller issues instructions to follow the order.Industrial Air Jet filter Cement Dust Collection Removal Systems With Cyclone And Air Compressor
Technical Parameters of Equipment Selection:
Equipment Model |
HMC-24 |
HMC-32 |
HMC-36 |
HMC-48 |
HMC-64 |
HMC-80 |
|
Total Filtration Area m² |
20 |
25 |
30 |
40 |
50 |
64 |
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
Air Volume m³/h |
1200-2400 |
1500-3000 |
1800-3600 |
2400-4800 |
3000-6000 |
3840-7680 |
|
Quantity of Filter Bag |
24 |
32 |
36 |
48 |
64 |
80 |
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
Beard Negative Pressure Pa |
5000 |
||||||
Equipment Running Resistance Pa |
800-1200 |
||||||
Injection Pressure Mpa |
0.4-0.6 |
||||||
Electromagnetic |
Specification |
DMF-Z-25(G1") |
|||||
Quantity |
4 |
4 |
6 |
6 |
8 |
8 |
|
Induced Draft Fan Model |
4-72-2.8A |
4-72-3.2A |
4-72-3.6A |
4-72-3.6A |
4-72-4A |
4-72-4.5A |
|
Power of Motor |
1.5kw |
2.20kw |
3kw |
4kw |
5.5kw |
7.5kw |
Equipment Model: HMC- 160B Industrial Air Jet filter Cement Dust Collection Removal Systems With Cyclone And Air Compressor
Application Field: Dust removal of combined grinder, grooving machine, grinding and cutting machine.
Industrial Air Jet filter Cement Dust Collection Removal Systems With Cyclone And Air Compressor
Equipment Model |
HMC-96 |
HMC-100 |
HMC-120 |
HMC-160 |
HMC-200 |
HMC-240 |
|
Total Filtration Area m² |
77 |
80 |
96 |
128 |
160 |
192 |
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
Air Volume m³/h |
4620-9240 |
4800-9600 |
5760-11520 |
7680-15360 |
9600-19200 |
11520-23040 |
|
Quantity of Filter Bag |
96 |
100 |
120 |
160 |
200 |
240 |
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
Beard Negative Pressure Pa |
5000 |
||||||
Equipment Running Resistance Pa |
800-1200 |
||||||
Injection Pressure Mpa |
0.4-0.6 |
||||||
Electromagnetic |
Specification |
DMF-Z-25(G1") |
|||||
Quantity |
12 |
10 |
12 |
16 |
20 |
20 |
|
Induced Draft Fan Model |
4-72-4.5A |
4-72-4.5A |
4-72-5A |
4-72-5A |
4-68-8C |
4-68-6.3C |
|
Power of Motor |
7.5kw |
7.5kw |
11kw |
15kw |
18.5kw |
22kw |
Baghouse And Other Accessories:
Botou Xintian Environmental Protection Equipment Co., Ltd is a professional dust removal equipment and dust removal accessories manufacturer in collection of research and development, design, equipment manufacturing, field installation, and commissioning Our company mainly produces: electric dust collector, high voltage electrostatic dust collector, rotary umbrella type high efficiency electrostatic dust collector, collecting high voltage electrostatic dust collector, tube pole type electrostatic dust collector, wide spacing electrostatic dust collector, pulse bag dust collector, long bag off-line pulse dust collector, high voltage off-line pulse bag dust collector, micro shock flat bag dust collector, rotary back blowing dust collector, bag type back blowing dust collector, single machine dust collector unit, single bag dust collector, single bag dust removal equipment, cyclone dust collector, coarse powder separator, wet vertical kiln dust collector, desulphurization dust collector , various types of electromagnetic pulse valve, YJD series (discharge valve), horizontal reducer, vertical reducer, planet cycloid pin wheel reducer, a variety of dust removal cloth bag series, a variety of bag cage series, pulse controller, cylinder, electric control cabinet and other dust collector accessories products, and we can also do non-standard design, modification and installation according to the requirements of users .
Our Partner
1. Q: Are you a factory or a trading company?
Answer: We have 1 factory. Botou Xintian Equipment Environmental Protection Co., Ltd. is a trading company.We have an improvement team from design, manufacturing ... to installation, commissioning and personnel training.
2. Q: Where is your factory?
Answer: Our factory is located in Botou City, Cangzhou.
3. Q: How does your factory perform quality control?
A: We test the machine before shipment. Our factory has obtained ISO9001: 2008 certification.
4. Q: How long is the warranty period?
During use, two years warranty and free consultation.
5. Q: How to pay for the product?
Provide letter of credit, wire transfer and Western Union.
Contact Us: