Name | flowmeter sanitary |
Nominal diameter | DN10-3000mm |
Pressure | 0.6~4.0MPa ( Special pressure customize ) |
Flow range | <15m/s |
Structural style | Integrated type , Split type , Insert type, Battery type |
Protection Class | IP65, IP68 optional |
Medium Conductivity | ≥20μs/cm |
Liner Material | PU、PTFE、CR、FPM、F46、PFA |
Measuring medium | Conductive Liquid |
Accuracy | Indicated value ±0.5%, Optional values ±0.3% |
Electrode material | HB, HC, WC, 316L, Ti, Ta, Pt |
Connection | Flange Clamp Thread |
Power supply | 220VAC/ 24VDC/3.6V |
Certification | CE, ISO，ATEX |
Signal output | Pulse / 4~20mA / RS485 / HART/Modbus |
Lining Material | Main conditional | Scope of application |
CR | 1. Excellent elasticity，High breaking force、Good abrasion resistance 2. Resistant to the corrosion of general low-concentration acid, alkali, and salt media, but not resistant to oxidizing media. | 1. ≤60℃ 2. Water, sewage and slurry, mineral serosity of low abration. |
PU | 1. Excellent wear resistance 2. Poor acid and alkali resistance Water that can not be used to mix organic solvents | 1. ≤80℃ 2. Applicable in mineral serosity, slurry and coal slurry of high abration. |
PTFE | 1. Boiling resistant hydrochloric acid, sulfuric acid, nitric acid and Wang Shui 2. Also resistant to concentrated alkali and organic solvents 3. Poor wear resistance Poor ability to resist negative pressure | 1. ≤120℃ 2. Strong corrosive medium such as concentrated acid and base 3. Sanitary media |
F46 | 1. Having the same abration resistance with PTFE. 2. Resistance for low abration. 3. Having strong resistance to load pressure | 1. ≤180℃ 2. The same as PTFE 3. Applicable in medium of low abrasion |
FPM | 1. Excellent elasticity, high breaking force, good abrasion resistance 2. High-temperature non-corrosive medium | 1. ≤180℃ hot water |
PFA | 1. chemical equal to PTFE 2. Compressive tensile strength is good than F46 | 1. ≤180℃ 2. Corrosive acid-base salt |
