Programmable Hi-Speed Spin Coater with Vacuum Chucks Up to 10000RPM

Main Features
                    

· 500 ~ 10000 RPM spinning speed programmable

· Accept substrate from 5 mm to 5" 

· PP chamber for anti-corrosive operation.

· One gas inlet port on top of the cover which can fill inert gas during coating

· One 20ml Plastic Syringe is included

· Suitable using Ar gas ( vacuum pump must be outside glovebox)

· The safety interlock is integrated into the lid

Vacuum Chuck

· Chamber size: 150 mm diameter 

· 2 sets of PP anti-corrosive vacuum chucks with different sizes (O-ring ID Φ44mm, Φ10mm), which can hold substrate from 5 mm to  5" Dia.  ( see pic below ) 

Vacuum Pump

· One 120L/min Oilless Vacuum Pump is included in the standard package. (Pic.1)

· For Ar glove box user, Please consider our 24VDC vacuum pump to be used inside a glove box without feedthrough. (Pic.2)

· Vaccum grade rubber pipe is included for immediate use.

·     

Programmable Control
 

· Duration up to 60 seconds

· Acceleration: 100 - 2000 rpm / sec adjustable

· Accuracy:   < 5%

· The digital control panel can store 12 programs and each program has 6 segments programmable for  speeds, acceleration, and spin duration (please click picture below-right to see typical program setting)

Input Power

· AC 220V (Please email us for AC 110V Version)

· 1000 W total for the oilless pump and spin cater

· 24VDC high-speed motor

Gas Inlet

6mm diameter gas inlet port allows customers to fill desired gas into the chamber, which can make coating under variable gas flow environment.

Liquid Injection

   

· Standard Package:  20ml plastic syringe with needle

· Option 1:  Precision Electronic Single Channel Pipette: 20 - 200uL

· Option 2:  Heatable glass syringe with temp. controller, up to 200C

Optional

· Option 1: PE Heating cover with digital temperature controller up to 120°C(<10 minutes) is available upon request at extra cost. This is a short drying process (usually takes several seconds or Max.10 minutes) which can dry and solidify the coating and remove the residual solvent after the coating process is completed. Click demo video & picture below for detail. 

· Option 2: PTFE Heating cover + PTFE vacuum chuck set is capable of drying temperature up to 200°C(< 5 minutes). Vacuum chuck and chamber also need to be replaced by PTFE material to withstand high heating temperature. 

· Option 3: UV lighting Cover with the controller for drying polymer film quickly (New)

Product Dimensions

450mm Depth ×280mm W ×340mm H

Net Weight

20 kg 

Warranty & 
Compliance

· One year limited with lifetime support

· Rusting and damage due to improper storage condition or maintenance are not covered by warranty

· CE Certified

· NRTL or CSA certification is available at the extra cost.

Warnings

· Do not overflush the water bowl/base with any kinds of liquid. Excess liquid will leak into the motor shaft and cause damage. Please use fabric cloth to wipe out the residues remain in the bow/base.

· If necessary, turn on the water outlet when flushing the water bowl/base to avoid liquid overflowing during the operation.

· For more details about the cleaning procedure, please review the cleaning instruction for the spin coaters.

Shipping Dimensions

40"(L) x 30"(W) x 30"(H)

Shipping Weight

46 kg (100 lbs)