Programmable DC12V-24V Constant Voltage PWM Signal 2CH LED SD Card DMX Master Controller
LED SD Card DMX Controller
dmx512 decoder led driver dmx512 decoder led driver
Functions of LED SD Card DMX Controller:
1,Gray level 32-65536 to control, real image color and detail.
2,Fast key setting controller parameters with press-buttons.Such as Driver Chip type,the Controller Serial Number,Program Fragment,Play Speed,LED Brightness.
3,Display module to display and control parameters, state.
4,Support remote setting controller parameters.Such as Driver Chip type,the Controller Serial Number,Program Fragment,Play Speed/Jump frame frequency,LED Brightness and On/Off time .
5,Support SD card to store animation data, convenient and quick.
6,Program fragments can be set up independently year, month, day and week .Playing regularly.
7,Support DMX512 agreement, 2 channel outputs .
8,Support the addressing function of MR-DMX05,DMX512AP,UCS512 DMX512 Chips and so on.
9,A variety of drive chip control integration, set up by the software to change the chip type, the clock frequency, duty ratio, the gray level and other parameters.
10,Support the synchronization of controllers.
11,Support the dc or ac power supply .
12,Time to lock encryption function.
13,Optical module application for environment/audio light control .Interactive convenient to adjust the brightness of lamps.
14,Support the standard USITT DMX512/1990 general and extension agreements.Such as DMX512,DMX512AP,UCS512,MY7221.
Specification of LED SD Card DMX Controller:
Product Name | DMX340-Offline Controller |
Control Color | RGB,RGBW,Full Color |
Control Pixels | 340Pixels(2x170Pixels) |
Output Channel | 2 Channel DMX512 Signal |
The Light Gary Level | 256 Level-65536 Level |
Input Voltage | AC 12V |
Power | 2W |
SD Memory | 4G |
Product Size | 190mm x 96.3mm x 32.5mm |
Interface | XLR-3PIN ,RJ45 |
Images of LED SD Card DMX Controller:
Size of LED SD Card DMX Controller:
Remote Setting of LED SD Card DMX Controller:
Application of LED SD Card DMX Controller:
When DMX340 was used for sync-lines application ,we can set up the No.1 controller to realize the synchronization control the subsequent controller .Such as program fragment selection,speed adjustment and so on .
Controller using ac power supply(AC12V)
Notice :
1,In DMX340 lighting control system:
when using in synchronization application ,we need to notice the only one controller ID=1 we can set .In general ,No.1 controller is located in the first one of all cascaded controllers .
2,The application range of the time switch of relay in general to use only one DMX340 for project.Standard products without this features.