1.Specifications
ADSL2+ | |
Standards | ITU G.992.1(G.dmt),ITU G.992.2(G.lite), |
ITU G.994.1(G.hs),ANSI T1.413 issue #2,ITU G.992.5(ADSL2+) Annex L |
|
Up channel rate | 0~1.2Mbps |
Down channel rate | 0~24Mbps |
Up/Down attenuation | 0~63.5dB |
Up/Down noise margin | 0~32dB |
Output power | Available |
Error test | CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode | Available |
Display channel bit map | Available |
ADSL | |
Standards | ITU G.992.1 (G.dmt), ITU G.992.2(G.lite), |
ITU G.994.1(G.hs), ANSI T1.413 Issue # 2 | |
Up channel rate | 0~1Mbps |
Down channel rate | 0~8Mbps |
Up/Down attenuation | 0~63.5dB |
Up/Down noise margin | 0~32dB |
Output power | Available |
Error test | CRC, FEC, HEC, NCD, LOS |
Display DSL connect mode | Available |
Display channel bit map | Available |
DMM Test | |
DC voltage (V): | 0~400 |
AC voltage (V): | 0~400 |
Loop resistance(Ω): | 0~20000 |
Capacitance (nF): | 0~1000 |
Insulation resistance (MΩ): | 0~50 |
Optical Power Meter ( Optional) | |
Measurement range: | -70~+10dBm or -50~+26dBm |
Wavelength | 850nm,1300nm,1310nm,1490nm,1550nm,1625nm |
Visual Fault Locator (Optional) | |
Output Power | 10mw |
Wavelength | 650nm ± 20nm |
Tone Tracker (Optional) | |
Output Power | 10mw |
Wavelength | 650nm ± 20nm |
TDR Function (Optional)-Auto Test the cable fault distance (Cable Break/ Cable Mix) | |
Test Range | <2.5km |
Dead Zone | <1m |
Resolution Rate | 1m |
2. Key Features
Ø Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2
Ø Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)
Ø Supports Modem emulation and simulating login to Internet
Ø Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)
Ø Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)
Ø Connects to CO via alligator clip or RJ11
Ø Rechargeable Li-ion Battery
Ø Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL)
Ø Data memory fuction
Ø LCD display, Menu operation
Ø Auto shut off if no any operation on keyboard
Ø Compliant with all known DSLAMs
Ø Software management
Ø Simple, portable and money-saved
3. Functions
Ø DSL Physical layer test
Ø Modem Emulation (Replace the user Modem completely)
Ø PPPoE Dialing (RFC1683,RFC2684,RFC2516)
Ø PPPoA Dialing (RFC2364)
Ø Telephone Function
Ø DMM Test
Ø Ping Function (WAN & LAN)
Ø Data upload to computer and software management
Ø Setup system parameter: backlight time, shut off automatically time without operation, press tone,
Ø Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and so on.
Ø Check dangerous voltage
Ø Optical Power Meter (Optional)
Ø Visual Fault Locator (Optional)
Ø Tone Tracker (Optional)
Ø TDR Cable Fault Locator (Optional)