ZME-2025 Professional hid xenon lamp for auto headlight testing chamber price
Machine Summary:
Xenon lamp aging test is a kind of comprehensive climate test equipment, support climate aging test,polymer
light fastness test(Polymer materials exposed to simulated solar spectrum of artificial lightthrough the glass
to assess the light resistance of materials). From the light, temperature, rain orcondensation, humidity and
so on to do the simulation and strengthen test; use simulating full sunlightspectrum xenon arc lamp to
simulate the destructive waves of different environment. Can be used for theselection of new materials,
improvement of existing materials or evaluate the material durability Aftermaterial composition changes
and other testing.
The Xenon lamp Simulate the uv light, and the machine make the test specimen expensed to uv light,high temperature and water spray to proceed the test! This machine use xenon lamp tube to simulate thesunlight
radiation, use the condensate and spray to simulate the dew and rain.
This machine only need a few days or weeks time, can show the condition or the parts components of aging damage status outdoor many months even a few years time, including colour fading, color change, fracture,
fissure, wrinkle, blister, embrittlement, strength reduction, oxidation and so on.
Technical Parameters:
Model |
ZME-2025 |
||
Sample exposure area |
560cm2 |
||
performance index |
blackboard or black mark temperature |
BST 35°C-100°C |
|
spectral wavelength |
UV-A340, wave length:340nm |
||
Irradiation light source |
Full spectrum xenon lamp(air-cooled) irradiance/(w/m2*nm):adjustable |
||
Xenon lamp power |
2.5kw (lifetime:2000 hours) |
||
Temp. and humi. control system |
time controller |
Import programmable time computer integrated controller(MOELLER) |
|
Accuracy range |
Setpoint accuracy: temperature±0.1°C Indication accuracy: temperature±0.1°C |
||
Temp. Humi. Sensor |
Platinum resistance Pt100Ω/mv |
||
Heating system |
The independent system,Nickel-chromium alloy electric heating heater |
||
temperature controller |
Import integrated microcomputer temperature and humidity controller |
||
Circulatory system |
Low noise of heat-resistant air-condition type motor, leafy typecentrifugal rotor, Cooling tubes used air-cooled system |
||
Power voltage |
AC220V±10% 50±0.5HZ |
||
Dimension |
81x35x75CM L*D*H |
Maintenance of equipment:
Installation site should consider factors such as the cooling efficiency of the machine and easy to check the maintenance, Other installation considerations:
1.The distance between this machine with wall and any other machines should be more than 60cm.
2.Should be set on the ground of the plain, no vibration, and use gradienter examination.
3.Ambient temperature should be keep into 10°C~25°C, the machine can operate in the most stable status.
If ambient temperature change too fast, for example change 5°C or more in a few minutes, the temperature
and humidity control and cooling rate, will can’t very stable control.
4.Should be away from the heat source and inflammable, explosive substance.
5.Do not under direct sunlight, and maintain indoor airiness.
6.Avoid placed in the place of the dust too much.
7.Power supply line and the drain road, should be shortened as much as possible.
Climate test chamber (or environmental test chamber) is to simulate the natural environment and climate with scientific and technological means, and the damage caused to modern industrial products. The representative tests of the environmental test chamber are: low pressure (high altitude) test, high temperature test, low temperature test, thermal shock test, solar radiation (Sunshine) test, rain test, moisture test, mildew test, salt spray test, sand dust test, etc.
Q1: What is your warranty?
A: 12 months product warranty, but lifetime for services. Free Non-consumable components will be provided if any performance failure occurs within 12 months caused by non-human damage.
Q2: How-to vedio provided?
A: Yes. if required, our engineers will record a specialize how-to video for you.
Q3: Are your company a trading one or a factory?
A: Yes, we are a manufactured factory & trade company (integration). 21 years focusing on test instruments field. 11 years exporting experience, warmly welcome to visit our plant (factory), we also support OEM and ODM.
Q4: After an order is placed, when to deliver?
A: Generally about 25 days. If we have inventory, we can arrange shipment within 7 days. Please be aware that our production lead times depend on specific items and item quantities.
Q5: What about the after-sales service and product’s quality?
A: 12 months warranty. After the warranty, the professional after-sale service team will provide perfect technical support.and help customer solve problems encountered while using our product, handies guest problems and complaints professionally and timely. Each instruments must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. Engineers would be go abroad to training, repair and others help you need.
Q6: what about the packing of equipment?
A: Covered with air bubble film before put the machine into the stanard exporting wooden case, which not only has good shock absorption, impact resistance, heat sso has the advantag- es of nontoxic, odorless, moisture corrosion, good transparency etc.