600 MODEL COMPOSITE CRUSHER
1.simple structure low operation cost. Using the principle of stone strike stone , smaller wear.
2.broken rate is high, energy conservation
3.with fine, coarse grinding function
4.little affected by material moisture content, humidity can reach 8%.
5.working noise is less than 75 db, less dust pollution.
6.suitable for breaking medium hard, especially hard materials.
7.products are cubic, packing density is big, a very small iron pollution
8.little wearing of the impeller , easy maintenance.
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.
Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
Our crushers are ideally suitable for primary and secondary crushing, with low power consumption and easy maintenance. Every feature of these machines has been carefully designed to provide superior quality and performance. They are widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. These crushers are recommended by leading consultants in this field and are used by hundreds of customers all over the world.
Main technical parameters
Model | Feed size(mm) | Output size(mm) | Capacity(t/h) | Motor(kw) | Main shaft speed | Dimension(cm) |
PFL-600 | 100 | 5-10 | 15 | 934r/min | 180*72*175 | |
PFL-800 | 100 | 10-20 | 22 | 934r/min | 210*120*170 | |
PFL-1000 | 120 | 20-40 | 45 | 769r/min | 260*140*190 | |
PFL-1250 | 150 | 40-70 | 75 | 530r/min | 280*160*210 | |
PFL-1500 | 180 | 70-100 | 90 | 495r/min | 310*190*220 | |
PFL-1725 | 200 | 130-190 | 132 | 424r/min | 371*236*239 | |
PFL-2000 | 200 | 160-200 | 185 | 370r/min | 410*266*262 |
Our 600 model pictures:
Inner structure pictures:
1. Are you a trading company or a manufacturer?
We are a manufacturer.
2. How can I get to your company?
You can get a flight to Zhengzhou Xinzheng International Airport . and we can go to airport to pick you up directly.
All our clients from home or abroad, are warmly welcome to visit our factory and inspect our products!
3. How long is your guarantee?
One year(Calculated from the equipment arrives the customer’s side.). After this period we will definitely support
you when needed. You will be welcome to contact us with any problem may happened.
4. Will you send engineers to install the plant?
yes, but at an extra cost payable by the customer. Or you can get local contractors to do thecommissioning and we send one supervising engineer.
The service is offered by participating suppliers, and is designed to protect your payment if
your order is not shipped on time, or if the pre-shipment product quality (optional) does not
match the terms agreed on your contract.
Your payment is protected up to 100% of an amount - agreed between you and the supplier - called the Trade Assurance Order Amount.)