Professional Hydrostatic Test Machine for Seamless Gas Cylinder

Summary:

Professional Seamless Gas Cylinder Hydrostatic Test Machine is used for long-term pressure and plastic pipe and composite pipe burst test test equipment, the product complies with ISO1167, GB / T6111 "Fluid Plastic Thermoplastic Pipe endurance test Method ", and the applicable standards of the relevant materials.

Can be applied to PVC, PE, PPR, ABS, and composite materials within the pressure detection.

Features:

1), continuous work without barriers to ensure the integrity of the test;

2), the branches are independent of each other, easy to operate and maintain;

3) Equipped with pressurized water tank separately, pure water is used to fill the pipe sample by the main pressure pump to ensure water quality in the pipe and improve the service life of pipeline components (such as solenoid valve and needle valve)

4) The use of independent research and development, unique, pulse duty cycle pressure technology, the step-up and fill the pressure link into one, reducing a branch and the device, it reduces the risk of damage to the device;

5), the use of the United States piston pump, low noise, fast pressure, short working hours, indirectly improve the life of the plunger pump;

Equipment composition Description:

The test machine by the pressure control system, pressure source, temperature medium box, fixture parts.

1), the pressure control system in the control cabinet by the pressure piping and electrical control of two parts. Pressure piping from the accumulator, solenoid valve, manual needle valve, connecting pipes and other components. Electrical control by the microcontroller, LCD, pressure sensors, solenoid valves, relays, switches and other components.

2) The pressure source is used to provide total pressure to the main pressure system under test conditions.

3), thermostatic medium box mainly by the box, circulating pump, heater and temperature control system. Cabinet consists of stainless steel liner, spray shell, insulation, sample holder and lid composition.

4), A-type fixture, a unique design test fixture disassembly easier and more comfortable; wedge-type thread clamping device to make the clamping force greater. This series of fixtures with a reasonable structure, clamping speed, sealing and reliable, easy to remove features.

Working principle:

1) Set the control pressure and range of the main pressure meter so that the pressure source will provide the pressure of 2 ~ 3MPa higher than the maximum pressure of the branch and store it in the accumulator.

2) Calculate the test pressure according to the ring stress of the sample, and set the control pressure and range of the branch pressure meter accordingly. After the operation, the single-chip microcomputer controls the solenoid valve to be fully on, so that the pressure of the sample rises rapidly. Pressure reaches the set pressure into the pressure phase.

3), fill phase solenoid valve intermittent continuity based on single-chip data, the pressure source to accumulator pressure added to the sample.

4) When the pressure of the pressure source drops to the lower limit of the set pressure, the column pump will stop when it starts to work up to the upper limit.

5) The machine also has the functions of running, stopping, completing the test, breaking identification and the like, and enabling the operator to leave the experimental site during the experiment. When the sample appears leakage, rupture automatically shut down the road, the other tests continue normal until the test is completed. In similar models with excellent cost performance, is the ideal alternative to import products.

6), the main heating tank can guarantee the life of the heating tube, extracorporeal circulation so that the water temperature in the tank uniform.

Technical Parameters:

Key components of machine:

Host Control Software: Zhongli Company

(1) the pressure part

a, pressure pump: the United States giant piston pump

b, solenoid valve: imported from Germany

c, manual needle valve: stainless steel needle valve

d, accumulator: Siping

d, connecting pipe: Domestic Φ6 stainless steel pipe fittings for the stainless steel parts.

(2) pressure display section

a, temperature control instruments: Selection of Xiamen Yu Electric multi-function control table

b, the pressure control unit of the Company

c, pressure sensor: imported from Germany

e, electrical parts: the choice of Chint or People's Electric

Optinal:

Stainless steel grips: from φ20mm to φ630mm

Picture of Grips:

We can produce all rubber test machines:

We are Zhongli Instrument Technology Co., Ltd, an instrument Expert, Headquartered in Dongguan, Guangdong, China.since 2007, specialized in manufacturing Lab testing equipments.

Throughout its more than 13 years of history, Our products have sold well in the Europe, America and Southeast Asia market and total more than 80 countries these years,especially favored by European and American countries.

Our equipments cover a wide range of industries, such as rubber and plastics industry, food industry, packaging industry, electronics industry, etc.and are suitable for all scientific research units, quality inspection institutions and academic fields.

In addition to standard machines, our R&D team can customize it for you. Just tell us your needs and we will make you satisfied.

 Click here >>>> More Factory Prices and Shipping !!!  

1. How to choose the most suitable Mechanical Equipment ?

 Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do andthe required specification.
2. What’s the delivery term?
 At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15~20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.
3. Do you accept customization service?
 Yes, of course, we can not only offer standard machines, but also customized machines 

according to your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
4. Can we visit your factory before order?
 Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.
5. Do you have customers of our country before?

 Now our testing machines have been sold to more than 80 countries, like USA, Canada, Russia,UK, Italy, Germany, European , India, Pakistan, Philippine, Singapore, Malaysia,Thailand , Vietnam, Korea,Saudi Arabia,Brazil...and so on.
6. How about your warranty?
Generally,our warranty is two years. Within the warranty period, we can offer technique support and part parts change, necessarily, our engineers may go to your place for better service.
7. How about the packing for machine, is it safely protected during transportation?
 Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many testing machines abroad by sea or by air without damage.
8. What is the order process?
 Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging - balance payment - packing - delivery - customer receiving - after service. 
9. How to install and use the product?
 The product is shipped with an operating instructions and video of English version.

Welcome to visit our Official Website:
www.zltester.com

How to contact us?  

Send your inquiry details in the below, click " Send" Now!

  Click here >>>> More Information !!!