Prepaid Electric Energy Meter 3 Phase Stop Electric Meter With Magnet

 V

DDSY1986

single phase electronic prepaid meter

Directions For Use

I usefulness,specialty and appliance range

DDSY1986single phase electronic prepaid meter (prepaid meter)adopt micro-electron technique amount energy

power,which conforms to IEC62053-21:2003 and GB/T18460.3

-2001 standard meter,adopt full-screening ,full-sealed

structure,has advanced monolithic process system to conduct picking,processing and reserving data,assuming favorable specialty of repelling electromagnetic

interference,low consumption power savings,high accuracy & no checking meter,anti-thieve electricity,high load,long life.

Main specialty:apply computer management,buy electricity in advance then use it;it could limit the most used power at rated current range;a card of a meter,only one card of the meter,not loose electricity once loosing card,feed card to use;card transitive data two-way,automatic disconnect to warn user to buy electricity;the electricity amount is 0, automatic disconnect the electricity;It has definite anti-thieve electricity software design, etc.

DDSY877 series electronic energy meter used for 50Hz or 60Hz active metering power,installed indoor or in outdoor meter box.The surrounding temperature is between -10℃ to +50℃,relative humidity is not exceed 85%, and there is not putrid gas, in the same time, it should avoid the effect of dust sands, salt fog, dew, etc.

II,specification and main technical parameter

1, Specification

2.Basic error

Note:1,Ib is rated current,Imax is rated max.

2, Starting current:at the condition of rated voltage, frequency and power:class 1.0 meter is 0.004Ib, class 2.0 meter is 0.005 Ib.

3, Running with no-load:when circuit has no current and the voltage is 115% rated voltage,output pulse is not more than one.

4, Power consumption:≤2W,10VA

III,Main structure and work principle

1, Main structure

Adopt inflaming ABS shell,solid,sealed,good shielding property.

2, Work principle

First voltage divider gains voltage sampling

signal,diverter  take current sampling

signal, through multiplier to get voltage & current production signal,then frequency

transform to generate scaling pulse which is a  product between frequency and voltage & current .

Watt-hour meter work principle:

3, Data process

Energy amounts pulse through photo-electricity coupler send to CPU process,after operation store non-easy-lost EEPROM. Computer manages information system, through IC card reader,put into some amount and monitored IC card input micro-processor system, after CPU operation, then supply display,warning,disconnection

Q1: Are you a factory or trading company
A1: We are a factory, we can guarantee our price is first-hand, very cheap and competitive

Q2: How does your factory do regarding quality control?
A2: All the products will be 100% checked before the shipment.

Q3: When can I get the price?
A3:Usually we quote within 24 hours after we get your inquiry.

Q4: How could I get a sample?
A4: if you can not buy our product in your local area, we will ship a sample to you.You will be charged a sample price plus all related shipping costs.Express delivery charge depends on the quantity of the samples

Q5: What is the price of shipping?
A5: Depending upon the port of delivery, prices varies.