The MS50SFB is a compact and small size Bluetooth 5.0 module with ultra-low power consumption and optional antenna types; The module has the large number of GPIOs and excellent RF performance. Therefore, it can apply to a wide range of Bluetooth connected products. With an ARM CortexTM M4(F) MCU, up to 512KB flash, 64KB RAM, embedded 2.4GHz, MS50SFB can save the R&D and time cost. The module is highly integrated that contains all the necessary components from radio to a different antenna and a completely implemented Bluetooth protocol stack and programming UART communication protocol.
Features:
Frequency: 2402 to 2480 MHz
Max. Output power: +4dBm
Single power supply: 1.8 – 3.9V
Range: up to 60 meters in open space
Chip: nRF52832 (Nordic)
GPIO Quantity: 32
512kB Flash and 64kB RAM
Module size: 20.0 x 12.0 x 2.0 mm
NFC type A interface
ARM Cortex-M4F processor
Metal shielding with marking
UART communication protocol (Slave / Master optional)
3 optional antenna types: PCB antenna, chip antenna, IPEX
connector
Operating Temperature range: -25 to 80 degree Celsius
Pin definition
Symbol | Type | Description |
P0.00 XL1 | Digital I/O Analog input | General purpose I/O Connection for 32.768 kHz crystal (LFXO) |
P0.01 XL2 | Digital I/O Analog input | General purpose I/O Connection for 32.768 kHz crystal (LFXO) |
P0.02 AIN 0 | Digital I/O Analog input | General purpose I/O SAADC/COMP/LPCOMP input |
P0.03 AIN 1 | Digital I/O Analog input | General purpose I/O SAADC/COMP/LPCOMP input |
P0.04 AIN 2 | Digital I/O Analog input | General purpose I/O SAADC/COMP/LPCOMP input |
P0.05 AIN 3 | Digital I/O Analog input | General purpose I/O SAADC/COMP/LPCOMP input |
P0.06 | Digital I/O | General purpose I/O |
P0.07 | Digital I/O | General purpose I/O |
P0.08 | Digital I/O | General purpose I/O |
Shenzhen Minew Technologies Co., Ltd. (Minew for short) has been focusing on developing and manufacturing iBeacon, bluetooth key finder and other RF technology-based creative products and technical services.
As a professional factory, Minew has got the ISO9001:2008 certification.
What documents will you provide after I buy your samples?
Re: 1.Configuration App 2.Instruction 3.SDK 4.SDK instruction
Are you manufacture?
Re:Yes,we are professional RF hardware manfufacture over 10years
Do you have SDK ?
Re: Yes,we will provide you after sample was arrived.
How long will the order shipping?
Re:for samples,we will shipping within 1-2days after received the payment.
for bulk order,like 1000-5000pcs,the leadtime is 3-4weeks
Is the sample including battery?
No battery inside .
Any more questions,pls contact us or sent inquiry.