PowMr MPPT Charge Controller 30A 40A 12V/24V auto, Built-in BLE and Weatherproof Solar Charge for Lithium Lead Acid Battery
Thanks for selecting the Magic series series solar controller.
Please take the time to read this user manual,this will help you to make full use of many advantages the controller can provide solar system.
This manual gives important recommendations for installing and using and so on.Read it carefully in your own interest and pay attention to the safety recommendations in it please.
1) Innovative Max Power Point Tracking(MPPT) technology, tracking efficiency >99%.
2) Full digital technology,high charge conversion efficiency up to 97%.
3) LCD display design, read operating data and working condition easily.
4) Real-time energy statistics function.
5) 12V/24V automatic recognition.
6) Liquid and GEL battery for selection
7) External temperature sensor, automatic temperature compensation.
8) Built-in temperature sensor, when the temperature exceeds the set value, the charging current will lower down followed by the decrease of temperature, so as to control the controller’s temperature rise.
9) Four stages charge way:MPPT,boost,equalization,float.
10) With current-limiting charging mode,when the power the charging power,which enables the system to work under the rated charging current.
11) Multiple load control modes: Standard, Dusk to Dawn, Timer and test mode.
12) Two USB interfaces(EU Series).
13) Based RS-485 standard Modbus protocol,to maximize their communication need of different occasions.
14) Perfect EMC & thermal design.
15) Full automatic electronic protect function.
MPPT, LCD display, RS485, 12/24V system voltage
1,Innovative MPPT technology, tracking efficiency 99.9%, conversion efficiency up to 97%
2,Real-time display the operational data and working status of the controller in digital, graphic and textual forms by a large LCD
3,Many choices of battery type, working mode and protection
4,Two navigation buttons, easy to implement various operations 5,Clear readable display of charge/discharge, battery and error description
6,12V/24V automatic recognition, temperature compensation, Perfect EMC design
7,Four stage charge way: MPPT, boost, equal, float 8,Full automatic electronic protect function
MT3075 | ||
Battery Parameters | System voltage | 12/24V automatic recognition |
Max charging current | 30A | |
Mppt charging voltage | <14.5V/29.0V (25 °C ) | |
Boost voltage | 14.5V/29.0V (25 °C ) | |
Equal voltage | 14.8V/29.6V (25 °C )(Liquid) | |
Float voltage | 13.7V/27.4V (25 °C ) | |
Battery type | Liquid Gel | |
Panel Parameters | Max solar voltage | 55V |
Max input power | 390/780W | |
Day/Night threshold | 8.0/16.0V | |
MPPT tracking range | Vb+1.0V)~Voc*0.9*(Voc means the open circuit voltage of the solar panel.) | |
Load | Work mode | Standard,Street lamp |
Max load current | 30A | |
System Parameters | Max tracking effiency | >99.9% |
Max charge conversion | 97% | |
Self consumption | 7mA | |
Ambient temperature | -20 °C ~+50°C | |
Ambient humidity | 0~100%RH | |
Protection degree | IP32 | |
Max altitude | 4000m | |
Dimensions/Weight | 189*182*58mm/1000g |
1) Heat Sink dissipate controller heat
2) Plastic Case Internal protection
3) LCD Display settings and operating status,system parameters
4) Key:MENU,OK Set and view the operating parameters
5) Two USB interfaces Output 5V,2A
6) Temperature Sensor Port Collect temperature information,Temperature compensation.
7) Load Terminals Connected load.
8) Battery Terminals Connect the battery