Customized hidden Standing Seam Roof Panel Roll Forming Machinery
The total length of the equipment |
Length 108000mm* width 1600mm* height 1200mm |
The motor power| |
5.5kw Working voltage 380v or custom |
Production speed |
10m-18m/min |
Effective width |
960mm |
Shaft diameter |
22 lines of 070mm shaft material 45# steel for tempering and tempering |
Pressed round |
45# forgings, fine turning, polished, hard chrome surface |
Equipment chassis |
No. 400 H steel (or double 250H steel) 14mm thick side plates |
The transmission way |
1 inch chain drive |
Hydraulic pump station |
5.5kw |
Shear knife |
Made of Cr12 material, quenched at high temperature and composed of three knives |
The thickness of the plate |
0.3-0.8mm |
Feed width |
1200mm |
accessories |
One set of feeding rack, one operating cabinet, two sets of operating procedures and operating instructions |
The molding part |
The press forming system consists of frame, transmission parts and cold forming roller set. Divided into precision wheel rotation forming, forming effect is good, reduce the friction between wheels and raw materials, debugging convenient, fast. |
The working process |
(feed blank material) uncoiling - guide feeding - roller forming - constant length cutting - finished product plate out of the manual point fixation workpiece, manual winding, enter the PLC operation page - press the "start" button - plate automatic entry - start according to the set procedures - large to ulnateaEt forming |
Feed guide platform |
The inlet of the main engine is equipped with left and right guiding devices. When working, both sides of the raw material sheet are guided to the main machine, so that the raw material sheet and the roller forming system keep the correct position. The guide position can be adjusted through the manual screw mechanism, and the left and right are independently adjustable. |
Cut off the system after E |
The cutting system consists of cutting off the frame, cutting off the die, guiding device and cutting off the cylinder. Cutting knife material for aluminum steel quenching treatment. |
Electric control system |
Delta PLC control, the machine can achieve automatic production. Can set batch, workpiece length, quantity, etc. Operation mode: input screen + button. Encoder counting, with counting and length recording function. |
Hydraulic system |
Adopt external independent hydraulic station (provide power for cutting off) |
Maximum error |
The main machine has many rows, stable performance, and the maximum length error is ±2mm |
Matters needing attention |
Power supply input: three-phase 380V 50/60hz power grid voltage fluctuation: s±10% around the wall and other shielding meters |
process for work: decoiler→feeding→roll forming→measuring length→cutting to length→product to stand