Portable UV handheld Machine 400W small size UV Curing lamp Machine for coating drying UV Products
Quick Details
Place of rigin: | China (Mainland) | Brand Name: | UV Curing Lamp | Model Number: | UV Curing Lamp |
Rated Power: | 150W 250W 400W 550W 1000W | Voltage: | 220V | Diameter: | 22.5mm |
Material: | Quartz | Leads: | Teflon | Type: | UV lamp |
Life: | 1200 hours | peaking wave: | 365nm | Brand: | FTL |
Packaging & Delivery
Packaging Details: | neutral box/wooden box |
Delivery Detail: | within 15 days |
Portable UV 400w 1KW hand held Lamp power unit for vehicle decoration Beauty maintenance repair spotlight paint
hand held uv curing lamps
You can use this uv light for curing uv ink conveniently and Economically.
hand held uv curing lamps
uv curing lamp
You can use this portable uv light for curing uv ink glue conveniently and Economically.
The light source is constituted by power control box and lamp hourse. Power supply is 220V. When using, first, insert the power supply plug of control box into the outlet, then connect the power outlet into single-phase 220v circuit.
Power Parameter | Voltage 220V |
UV Lamp Power | 550W/1000W |
Lamp Length | 130mm |
Lamp Light District | 6CM |
Wavelength | 365nm |
Lamp Life Span | 1000 hours |
Dimension | electric cabinet¦ 250L*125W*160H |
lamp house ¦ 210L*125W*160H | |
Weight | power weight ¦4.5kg |
box weight ¦2KG |
Boot-strap
(1)Close the external circuit breaker .
(2) Close the master switch,at this point ,power light on power box is on and fan starts .
(3)Turn on UV light switch .About 3mins later ,UV light will reach best condition (UV strongest),then it can make UV light source shine on the goods surface .
Power off
(1)turn off UV lamp switch,now UV light will be off.
(2)when the temperature in UV lamp case reduces (about below 50degree),turn off the main switch.
(3)turn off power cell.
Matters needing attention
The power is portable design , UV tubes outside in installation,pay attention to the following points
(1) As ultraviolet radiation is harmful to human being irradiating to eyes and skins directly is prohibited to avoid burn
(2) Lamp case should put in proper place when out use to protect the tubes from hitting by stiff goods
(3) Protect lamp light from hitting by stiff goods when lam case in use Then the light case is in high temperature, we should defend burn.
(4) When the power in use, turning on the power control shell is prohibited to defend electric shock.
(5) When induced draft fan do not move ,do not turn on the switch to prevent tubes and other parts from over heat ..
(6) Do not use UV lamp in exploding area.
(7) If need to change UV light source using position ,turn off the UV light and power then turn on according to priority in the new position .
Application areas:
1)Car maintenance and repair curing UV Car Paint and repair Spotlight
2)Car Beauty
3)Car rennovation
4)rapid vehicle repair service
5)Coating industry ,curing UV gloss oil ,UV paint ,UV Resin,UV Glue