1.This series machines are driven by blade type pneumatic motor and run with low speed of torque obtained from planetary gear set.
2.The blade holder is equipped with automatic feeding unit.The bevel angle of this series is within 0-37degree.
Order NO. |
Model NO. |
Input Air Pressure (motor)MPA |
Air Consumption | Diameter of pipe | MAX width of beveling MM | Milling speed |
MAX Flange Range | Weight |
HW5501 | GPK-28 | 0.6 | 900 | 16-28 | 8 |
53 | 25 | 7.8 |
HW5502 |
GPK-80
|
0.6 | 900 | 28-80 |
15 |
100 | - | 13.6 |
HW5510 |
GPK-150 |
0.6 |
900-1100 | 65-159 | 15 |
34 | - | 30.8 |
HW5515 | GPK-250 | 0.6 | 900-1100 | 80-240 | 15 | 23 | - | 45.2 |
HW5516 | GPK-250-II | 0.6 | 900-1100 | 80-240 | 75 | 23 | 145 | 54.2 |
HW5520 | GPK-351-! | 0.6 | 900-1100 | 159-351 | 15 | 14 | - | 58.2 |
HW5521 | GPK-351-II | 0.6 | 900-1100 | 159-351 | 75 | 14 | 145 | 66.4 |
HW5530 | GPK-630-! | 0.6 | 900-1200 | 351-630 | 15 | 10 | - | 119.3 |
HW5531 | GPK-630-II | 0.6 | 900-1200 | 351-630 | 75 | 10 | 145 | 115.3 |
HW5534 | GPK-630-III | 0.6 | 3600 | 610-820 | 15 | 13.5 | 54 | 152 |