【Caution】.
1, not to be used in large and overweight vehicle tyre inflation, such as trucks, large trucks, boxed container trucks, etc..
2、Please start the car engine to enhance the power when using, not consume the car battery power.
3、The machine is limited to use DC (DC12V) power supply, not to use household high-voltage AC (AC220V) power supply.
4、When inflating, please stop the machine after 10 minutes of continuous work for 10 minutes to cool down, in order to prevent damage to the air pump and accessories, and to extend the life of the motor. 30 minutes of continuous operation when inflating rubber boats.
5, general tyre inflation, in about 3-5 minutes can reach 30PSI normal tyre pressure, large tyres will take a little longer; if the instrument pointer quickly rise to 50-100PSI when starting to inflate, it means that the air is blocked, the air does not enter the tyre, then you need to immediately unplug the air nozzle connector, re-operation, otherwise the motor and the instrument will be easily damaged.
6、Don't leave the machine when using it, always pay attention to the tire pressure, don't saturate too much.
7、After using this machine, the air nozzle spanner must be straightened to avoid the elasticity of the rubber inside from getting tired.
8、The air pump plug is equipped with a fuse, if the air pump does not start, please open the plug to check and replace (the fuse is 10A).
9、This machine should avoid moisture, heavy falls and sand and mud intrusion, avoid children playing with it, so as not to be damaged.
10、Each type of tyre requires different pressure, please refer to the label on the side of the tyre or ask the car manufacturer.