NO | Parametric description | Value |
1 | Octane measuring range(ON) (can be adjusted by clients' requirement) | 40~120 |
2 | Allowing error of measurement per unit(Maximum) | 0.5 |
3 | Floating range of the measuring result, per unit(Maximum) | 0.2 |
4 | Measuring time(sec) | <20 |
5 | Critical value V when the battery's voltage too low | 5.4 |
6 | Main enginemm(Length*width*hight) | 224*106*40 |
7 | Sensor mm | 60*100 |
8 | Weight Kg(Maximum) | 3.5 |
9 | Normal standby time(h) | 200 |
10 | Out put mode | LCD display printer output |
11 | Current consumption | 30MA |
1 | Open the box, take out the instrument and place the testing components on a horizontal table |
2 | Ensure that no other impurity sediment or oil slick in the sensor container. |
3 | Use glass cylinder to measure 75~100ml sample liquid, then, pour it into the detection container, until detection container was completely full. |
4 | Connect the sensor plug with the host machine |
5 | Press the "OK" button to open the instrument, the instrument automatically enter into the main screen |
6 | The Octane meter shows measuring data after twenty seconds, if testing containers got no oil sample; the display will exceed lower line, If got, It will show the testing value. |
7 | Measured data can be preserved, enter the main screen's printing option after saving the measured data |
8 | Pour out the sample liquid, using ethyl ether or gasoline to clean the machine, then, Use fabric to wipe it clean, No dust should be kept. |