technical parameter | ||||||
Saw-cut width(mm) | 450 | maximum working pressure;peak working pressure (PWP) (Mpa) | 30 | |||
Saw cut diameter range(mm) | Φ10~Φ40 | Threading machine power(KW) | 7.5*2 | |||
Steel bar transfer speed(m/min) | 60 | thread diameter Φ | 16-40mm | |||
size error (mm) | ±1mm/m | Sleeve length l | 80mm |
Cut off Saw The Master Machine | Saw cut feed speed | Continuously variable | threading productiveness(s/ header table) | 40s |
Clamp mode | hydraulic pressure | Grinding power(KW) | 1.5 | |
Main motor power(KW) | 4 | Grinding the steel bar diameter Φ | 16-40mm | |
Oil pump motor power(KW) | 1.1 | Steel bar receiving warehouse | 2*2 | |
Cooling pump power(KW) | 60 | Total installed power(KW) | 38.5 |
Saw tangent overall dimensions (long × wide × high)(mm) | 29000*6900*2000 | ||||||||||||||||
Saw-cut steel bar diameter(mm) | Φ12 | Φ16 | Φ20 | Φ25 | Φ28 | Φ32 | Φ40 | Φ50 | |||||||||
Number of sawing steel bar roots | 35 | 27 | 21 | 17 | 15 | 13 | 10 | 2 |