MDI and TDI are substitutes for each other, both of which are raw materials for the production of polyurethane.MDI is slightly cheaper and less toxic than TDI, but it has a higher density in foam production than the TDI system, and the polyurethane products formed by MDI have a relatively good molding property.
Product Name
WANNATE isocyanate
Appearance
Brown liquid
Viscosity(25℃,mPa·s)
150-250
NCO mass fraction(%Wt)
30.5-32
Acetic acid mass fraction(%)
≤0.03
Hydrolysis of chlorine mass fraction
≤0.2
Density(25℃,g/cm3)
1.22-1.25
Can be widely used in the manufacture of polyurethane rigid foam insulation materials;It can also be used in isocyanurate foam, coatings, adhesives, anti-seepage and sealing, structural foam, microporous self-skin foam, car bumpers, interior accessories, high rebound foam, synthetic wood and other fields.Because of its unique composition structure, it has good foam flow performance, and is also suitable for the manufacture of products with strict requirements on the flow performance of the foaming liquid.
Standard Iron Drum ,250KG/Iron Drum;20tons in one 20‘GP ,80drums/20FCL
Due to the active chemical properties of PM-200, it is easy to react with water, generate insoluble urea compounds and emit carbon dioxide, resulting in bulges and increased viscosity.Therefore, in the storage process, it is necessary to ensure that the container is strictly dry and sealed and filled with dry nitrogen protection.
It should be kept strictly sealed at room temperature (15℃ ~ 35℃) in a well-ventilated room.As the temperature decreases, the viscosity increases, which will affect the use.If the storage temperature is too low (below 5℃) can lead to crystallization phenomenon, so attention must be paid to anti-freezing.Once crystals appear, they must be heated and melted immediately in the shortest possible time.The heating temperature of the material shall not exceed 70℃.Local overheating is strictly prohibited as the product will decompose and produce gas at temperatures above 230℃.It is suggested to use hot air oven with barrel rolling device for drying.After drying, the materials in the barrel must be mixed evenly.In the process of barrel drying, close attention should be paid to the support point of the barrel to prevent wear and collision resulting in leakage.Long-term storage above 50℃ should be avoided to avoid the formation of insoluble solids and increase the viscosity.
Q1.Are you manufacturer or trading company ?
We are manufacturer.
Q2.How long is your delivery time ?
Generally ,it 's 7-15 days , If there is in stock , the delivery time will be shorter .
Q3.What's your terms of payment ?
We can accept T/T ,L/C at sight ,Westen Union ,Moneygram and cash .
Q4. Do you provide free samples? or extra charge ?
For samples ,1-5kg, it is free, you only pay the freight of them. If more sample requested, we will refund the sample fee in the first order.
Q5. About Material
We can customize the material as per your request to supply the suitable quality.
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier