Process name | Specific practices and requirements | Dosage of reference |
Step 1 Clean the base surface | Using a grinder to clean the base | - |
Step2 Grinding the base | 1. Use professional grinding machine with 50 mesh/150 mesh/300 mesh grinding disc for fully polishing. (It can be wet with clear water after grinding or directly with water grinding); 2. Cement pores are fully exposed, to be dry. | - |
Step 3 Spray color agent of concrete | 1. After the surface is dried, spray color agent by two to three layers (depending on the ground). 2. After each spray is evenly dry, spray the second one, and so on, until the color agent is fully absorbed. | 0.30 kg/m2 |
Step 4 Adding Curing agent for sealing | 1. Evenly spray on the dry ground after grinding treatment and clean up. Evenly spray and drag it back and forth with a mop. 2. It needs more than 12 hours for dry thoroughly in normal temperature; | 0.2 kg/m2 |
Step 5 Polishing the base | 1. Use a professional grinding machine with 500 mesh and 1000 mesh epoxy resin grinding disc to comprehensively grind for 2-3 times, and perform preliminary polishing on the overall base surface. | - |
Step 6 Spray fixing agent of concrete | 1. Clean the surface and spray fixing agent together. 2. Spray fixer and drag evenly until dry. | 0.05 kg/m2 |
Step 7 Full Polishing | 1. Use professional grinding machine with 2000 mesh and 3000 mesh resin grinding disc for overall fine grinding ... 2.Fine grinding for 2-3 times, and complete polishing of the overall base surface. | - |