Polypropylene Pleated 0.2 Micron Candle Filter Element

IPP Series Polypropylene Pleated 0.2 Micron Filter

The Polypropylene (PP) membrane filter has high flow rate and dirt holding capacity, 100% quality polypropylene construction with excellent chemical compatibility,

It's thermally bonded construction ensures minimal extractable and its high filtration efficiency makes it an excellent choice for use in various industrial applications.

1. Graded density ultra fine polypropylene membrane filter, could provide absolute rating filtration;

2. Pleated depth media for high flow rate and maximum dirt holding capacity;

3. 100% polypropylene construction offers broad chemical compatibility;

4. High retention efficiency provide excellent protection of downstream filters;

> Food & Beverages, Wines, Beer, Mineral Water, etc;

> Pharmaceuticals, API's, Biologics, Buffers, Reagents;

> Fine Chemicals, Inks, Solvents, Photoresists, etc;

> Electronic, Semi-Conductor, LCD Display, Discs;

Materials Of Construction		Filter Media:		Polypropylene Membrane
		Support Layers:		Polypropylene
		Micron Rating:		0.1, 0.20, 0.30, 0.45, 1.0, 3.0, 5.0, 10, 20, 50, 100 um
		Cage, Core, End caps:		PP
		Seal Method:		Thermal Bonded, No Adhesives
		O-rings/gaskets:		Silicone, Nitrile, EPDM, PTFE, etc
Cartridge Dimensions		Outer Diameter		69 mm
		Inner Diameter		33 mm
		Length		5, 10, 20, 30, 40 Inch
		Filtration Area(m2)		0.65 m2 per 10''
Operating Conditions		Normal Operating Temp:		Up to 60℃ (140℉)
		Max.Operating Temp:		80℃ (172℉) at P≤1.0 bar (14psi)
		Max. Differential Pressure
		Normal Flow:		4.2 bar (60 psi) at 25℃ (77℉)
		Reverse flow:		2.1 bar (30psi) at  25℃ (77℉).
		PH Value compatibility:		1-13
		Sterilization:		Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours;
				Flush with hot water at 82℃(180℉) for 30 minutes, at P≤1.0 bar (14psi) -- Recommended.
Typical Water Flow Rate (10")

If you need other information, please freely contact us.