Polymer Materials Universal With Astm D 638 Iso 527 Price Hard Plate Testing Machine Plastic Film Tensile Tester

Plastic Polymers Tensile Tester, Universal Tensile Testing Machine for Plastic Materials, UTM Machine Factory

Summary:

Plastics, polymers and composites can be tensile tested to measure product quality. Tensile tests measure the load required to break a plastic test sample and specimen stretch or elongation to that breaking load. The resulting test data helps specify materials, design parts to withstand forces, and key quality control checks for materials. Plastic composite tensile test equipment, testers and electromechanical universal test machines feature constant rate of crosshead extension or CRE because plastics tensile test behavior is time rate test speed dependent. Plastic tensile coupons (dogbone-shaped specimens with defined width and load stress psi) are made to ASTM, EN, DIN and ISO tensile test sample dimensions. Plastics composite tensile tester machine speed should always rely on standard specifications. Plastic tensile test standards ASTM D638 and ISO 527 both require axial extensometers to measure strain below 20 percent extension values. High travel or strain can be measured by the machine crosshead or digital encoder. Thin film sheet samples should follow ASTM D882.

Applicable Testing Standards

· ISO 527 - Tensile Test of Plastics Composites

· ASTM D638 Tension Testing for Plastics

· ASTM D882 Tensile Testing for Thin Plastic Sheeting

· ASTM D3039 Tensile Testing for Advanced Composite Materials

ASTM D638 Tension Testing for Plastics

ASTM D638 is one of the most common plastic strength specifications and covers the tensile properties of unreinforced and reinforced plastics.  This test method uses standard “dumbell” or “dogbone” shaped specimens under 14mm of thickness.  A universal testing machine (tensile testing machine) is needed to perform this test.

Test Procedure:

1. Cut or injection mold your material into one of the five “dumbbell” shapes.  The exact shape you use is dependent upon your material’s rigidity and thickness.

2. Load the specimen into tensile grips.

3. Attach the extensometer to the sample

4. Begin the test by separating the tensile grips at a constant rate of speed.  Speed depends on specimen shape and can range from 0.05 – 20 inches per minute.  The target time from start of test to break should be from 30 seconds to 5 minutes.

5. End the test after sample break (rupture)

Speficiations:

Recommended Plastic, Polymers Materials Tensile Testing Machine

Our Model NG-101, Servo Universal Tensile Tester with Extensometer

Newgory factory Research and Development Prodessional Extensometer (optional)

Common Tensile Grips

Professional designed software. PC to view test results, analysis of data and graph

NEWGOER though 20 years of continuous development, our company has established the main products line of Universal strength testing machines for tension, compression, flexure, and shear etc. Environmental testing chambers and Cell phone, Computer and 3C Electronics testing machines, Package and paper test equipment, Plastic and Rubber Test Equipment, Leather and Shoes Testing Machine and so on! Our equipment is used in over 80 countries worldwide and supported by a network of offices and approved agencies. Our products are used in all industries and educational sectors and we have an enviable reputation for innovation, quality product and excellent customer support !

Our Factory

We have professional packing teams and shipping forwarder to pack and deliver your products!

Packing:

1. Out packing:Standard export wooden case.

2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.

3. Checking teams: Specialized staff to inspect and classified your goods.

Shipping:

You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt ofyour order. It's more preferable for you to provide us with your own FEDEX/DHL account number so that the delivery charge can be charged directly from your account.

1.Are your company a trading one or a factory ?

Factory + trade (integration), 20 years focusing on test instruments field, 6 years exporting experience.

OEM is also acceptable for us.

2.How to choose the most suitable products?

Our professional team will give you the best suggestion as long as you tell us what kind of test you

need to do and the required specification.

3.What’s the delivery term?

At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20

working days after deposit receipt. If you are in urgent need, we can consider making special

arrangement for you.

4.Do you accept customization service?

Yes, of course, we can not only offer standard machines, but also customized machines according to

your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.

5.Can we visit your factory before order?

Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to

arrange hotel and pick up you from airport.

Send your inquiry details in the below, click "Send" Now !

Click Here to Visit Our Store !