Poly self adhesive tape underground pipe wrap tape for anti corrosion
♦ Specifications
Polyethylene anti corrosion PE tape ( pipe wrap tapes for pipeline outer layer) :
PE Outer Layer Tape is two ply polyethylene (PE) mechanical protection anti-corrosion self-adhesive tapes. It is cold applied tape coating systems for corrosion protection of Water, Oil and Gas Pipelines. The anti corrosion tape is highly recommended where a complete protection of primary coating is specified. Gives a smooth, tough protection to the pipeline under all climatic conditions, in any terrain, anywhere in the world. Its application should after the Anti Corrosion Tape—Inner layer tape.
♦ Structure :
Polyethylene anti-corrosion PE pipe wrap tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
♦ Application :
Polyethylene anti corrosion PE tape : Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water
underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or better with a wrapping machine.
♦ General Properties of PE Tapes :
Type | PE15 | PE20 | PE25 | PE30 | |
Tape color | Black,yellow,white | ||||
Base Material | Outer layer of Polyethylene(PE) Plastic | ||||
Width | 50mm,75mm,100mm, 150mm,200mm, 230mm,or as customized | ||||
Length | 30m to 250mm or as customized | ||||
Total thickness | 15mil | 20mil | 25mil | 30mil | |
Backing | 8mil | 2mil | 13mil | 10mil | |
Adhesive | 7mil | 8mil | 12mil | 20mil | |
Tensile Strength | 40N/cm | 60 N/cm | 61.2 N/cm | 63 N/cm | |
Yield Strength | 30N/cm | 35N/cm | 42 N/cm | 45N/cm | |
Peel Adhesion to Primed Pipe | 20N/cm | 21N/cm | 26 N/cm | 33 N/cm | |
Dielectric Strength | 25kv/mm | 35 KV/mm | 46 KV/mm | 48 KV/mm | |
Cathodic Disbandment | 0.24 in radius 6.4 mm | ||||
Elongation at Break | 400% | ||||
Volume Resistivity | 2.5 x 1012 ohm.m | ||||
Water Vapor Transmission Rate | £ 0.1gm/M2/24h | ||||
Water Absorption Rate | < 0.06% | ||||
Application Temperature | -5 to +60 °C | ||||
Working Temperature | -34 to + 85 °C | ||||
Recommended primer | Durable Primer |
Company Simple Introduction:
We are professional manufacturer and has twenty years experience in anti corrosion industry. Our main products includes
Our products are widely used to many important projects and water heater factories, Hongkong-Macau-Zhuhai bridge, Hangzhou Bay bridge, and Sinopec, Haier, AOSmith etc,.
a
Welcome to visit our Factory!
Dylan is waiting for you! Please add me,chat now.