Concrete bush hammer appliance:
It is used to remove cement tower and floor coat of concrete road and bridge with high hardness
allow bush hammer.
2.It not only improves the work efficiency and quality and make the face to achieve uniform roughness to remove surface laitance strong pavement concrete after binding.
3.It is made of quality hardness alloy bush hammer, strong impact, and long life.
4.Concrete floor scabbler is good shock structure, comfortable to operate
reasonable design structure easy to change bush hammers.
Technology Parameters
Model |
ZS-1A |
ZS-2A |
ZS-3A |
weight |
2.2kg |
3.5kg |
5.5kg |
power producer
|
0.9m3/5 kg air compressor |
0.9m³/5kg air compressor |
0.9m³/5kg air compressor |
No. |
1 |
2 |
3 |
Gouge frequency
|
1*2400/min. |
2*2400/min. |
3*2400/min. |
Working width |
21mm |
65mm |
100mm |
work efficiency |
Cut deep3-5mm,3.5-5 sq.m./h |
Cut deep 3-5mm,4-8 sq.m./h |
Cut deep3-5mm,5-10 sq.m./h |
Pneumatic concrete bush hammer for stone grinding
The most widely recognized item of Concrete Surface Preparation equipment, also described as a Scabbler, Groover or Scarifier. Typical uses include reducing screeds and levels, commonly referred to as planing; removal of coatings, line markings & membranes; texturing and grooving surfaces, often to increase Slip Resistance; removal of laitance and surface deposits, including ice in cold stores.
There are 3 types small handled scabblers and 3 types walk-behind scabblers.
Eleven Heads scabbler
Type |
P11A |
No. of cut head |
11 heads |
Dia. of cut head |
31 mm |
Weight |
76 Kg |
Working width |
283 mm |
Cut depth |
3-10 mm |
Displacement pressure |
2.8m3/5kg |
Working efficiency |
10-40 sq.m/h |
Size |
1260*283*320 mm |
Seventeen heads scabbler
Type |
P17A |
No. of cut head |
17 heads |
Dia. of cut head |
31 mm |
Weight |
110 Kg |
Working width |
410 mm |
Cut depth |
3-10 mm |
Displacement pressure |
3m3/5kg |
Working efficiency |
15-50 sq.m/h |
Size |
1260*425*320 mm |
Twenty-three Heads scabbler
Type |
P23A |
No. of cut head |
23 heads |
Dia. of cut head |
31 mm |
Weight |
160 Kgs |
Working width |
566 mm |
Cut depth |
3-10 mm |
Displacement pressure |
3m3/5kg |
Working efficiency |
20-80 sq.m/h |
Size |
1280*566*320 mm |