Welcome to TradeChina
Home > Products > Consumer Electronics > Portable Audio, Video & Accessories > Blank Records & Tapes
Pluto SDR Receiver radio 70MHZ~6GHZ AD9363 SDR Radio Receiver /Transmitter RX/TX Compatible ADI ADALM-PLUTO SOC Zynq7010 FPGA
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo wig Trading Co., Ltd
China - Hangzhou
Manufacturer
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
51-100 people
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
BRC
Product Specifications
--Product Description
Product Description
Pluto+ is a software-defined radio platform that supports 2TX 2RX, supports Gigabit Ethernet and Micro SD card. The design draws
on the well-known ADI ADALM-PLUTO and improves its shortcomings.
2.Features:
ADC/DAC:AD9363(Can hack to AD9361 or AD9364)
2 Transmit, 2 Receive channel
RF Range:70MHZ~6GHZ
Ref Clock:VCTCXO 40MHZ0.5ppm
SOC:Zynq7010 FPGA:28k
RAM:512M
FLASH:32M
USB:2.0support OTG
Ethernet:1000Mb
Micro SD can use to boot
DC IN:5V +-0.5V-2AmicroUSB
Interface
Please note that all IO levels are 1.8V.
3.1 When using the official ADI-PlutoSDR firmware, please connect to URST-MI052.
3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46
3.3 When using SD card to boot, please connect SD-H to 1V8
3.4 When using JTAG to debug, please connect JTAG# to GND
3.5 Please connect EXCLK to GND when using external reference clock input
PTT key port
PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit.
DFU KEY
At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper
to MI052
Ref CLK input IPEX
You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface.
The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock
Calibrate the frequency of the built-in VCTCXO
The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a
reference signal source
Micro-SD
Support booting via SD card, need to connect SD-H jumper to 1V8
on the well-known ADI ADALM-PLUTO and improves its shortcomings.
2.Features:
ADC/DAC:AD9363(Can hack to AD9361 or AD9364)
2 Transmit, 2 Receive channel
RF Range:70MHZ~6GHZ
Ref Clock:VCTCXO 40MHZ0.5ppm
SOC:Zynq7010 FPGA:28k
RAM:512M
FLASH:32M
USB:2.0support OTG
Ethernet:1000Mb
Micro SD can use to boot
DC IN:5V +-0.5V-2AmicroUSB
Interface
Please note that all IO levels are 1.8V.
3.1 When using the official ADI-PlutoSDR firmware, please connect to URST-MI052.
3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46
3.3 When using SD card to boot, please connect SD-H to 1V8
3.4 When using JTAG to debug, please connect JTAG# to GND
3.5 Please connect EXCLK to GND when using external reference clock input
PTT key port
PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit.
DFU KEY
At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper
to MI052
Ref CLK input IPEX
You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface.
The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock
Calibrate the frequency of the built-in VCTCXO
The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a
reference signal source
Micro-SD
Support booting via SD card, need to connect SD-H jumper to 1V8
Specification
item | Receiver radio |
Style | PORTABL |
Private Mold | Yes |
Type | Receiver radio |
Place of Origin | China |
Guangdong | |
Brand Name | OEM |
Model Number | 7010 |
Screen | Yes |
Function | FOR Transmitter |
Power Supply | None |
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier