Plastic-oil converting plant planta extractora de aceite de palma plant seed oil

Product Application

There are many types of screw press,and also,there are many kinds of oil filter too. The oil press is mainly used for the individual home processing machine,which belongs to a kind of screw oil press, and the output is small, but it is simple and convenient. Now Almost all seeds can be pressed through   automatic screw press. They include peanuts, soybeans, oil sunflowers, rapeseed, walnuts, cottonseed and so on. Especially peanut oil and sesame oil, because this is more expensive. There are often counterfeit and leach oil on the market, which is not good for health. So the way of processing on the spot is more satisfied with the needs of genuine users. It is the main mode of use in urban areas now.

1) High oil production rate .compared with the old type equipment, the normal oil production rate can be   higher than 4-6 percentage points. The  average amount of oil per 100 kilograms of peanuts can be more than 4-6 Catty , and the annual economic benefit is very considerable.

2) Energy saving .the same output will reduce the electrical power by 40%, with an average of 6 degrees per  hour, and electricity production can save 5 dollers per day.

3)Labor saving .the same output can save labor by 60%, and 1 to 2 people can organize production. The  cost of labor and efficiency can be saved by about 6dollers.

4)The machine is widely used. It can be used for more than 20 kinds of oil crops such as peanuts, sesame  seeds, rapeseed, cottonseed and soybeans. Multistage pressing, once pressed.

5) The oil quality is pure .vacuum filtration, which ensures the purity of the oil and meets the hygienic and   quarantine standards.

Working principle:The main part of the screw press is the press chamber, which is made up of the screw shaft which is rotating with the squeezing cage and in the squeezing cage. The process of working is to reduce the diameter of the spiral shaft or the diameter of the root circle gradually, which makes the volume of the squeezing chamber shrink and produce the pressing effect. The squeezed oil is squeezed out from the crevice of the cage, and the residue is pressed into the chips of the chip like cake, and it is continuously discharged from the end of the squeezing shaft. Generally speaking, the pressing oil extraction can be divided into three stages, namely, the feed (preloading) section, the main oil extraction section, and the cake formation (heavy oil Leach) section.