Mgreenbelt Water cooled chiller Commonly used to cool plastic products and plastic machinery, water chillers are used in a multitude of different applications including injection molding machines, blowing molding machines, and extrusion lines. The function of a plastic chiller is to move heat from one location (usually process in injection molding or product) to another place (usually the air outside the manufacturing facility). It is very common to use a water solution to transfer the heat to and from the plastic chiller which may require the process chiller to have a reservoir and pumping system. Regardless of your plastic industry and molding process, making sure that you have sufficient water cooling is critical to productivity and cost savings also in the injection molding machine.
High efficiency, flange inlet and outlet connection
Normally is carbon steel material, Stainless steel or Titanium are available
Semi-hermetic screw type, brand Hanbell, bitzer
Automatically operate with four steps or variable capacity control, making the compressor running at high efficiency.
Red copper tube covered aluminum fins, large heat exchanger area to discharge the heat and keep good cooling performance
Exact control, easy operate, show detail chiller running status and each parts data in the control system, which can be shown and check
Large volume, low noise and small vibration
6 stages,
internal rotor
Hermetic screw type, 4 stages controls to saving power and loading depends on the request , auto-matical control
One chiller can be 1 or 2 compressors
1- This chiller can be produced with 1 or 2 compressors, depends on budget of customers'
Product | Air Cooled Screw Chiller | ||||||
Model | MG-100CS | MG-110CS | MG-130CS | ||||
Power supply | 3PHASE-380V-50HZ, others 208v, 220v, 440v, 460v | ||||||
Outlet temperature range | +5 deg to +30 deg C | ||||||
Cooling capacity | tons | 75.6 | 82.7 | 97.5 | |||
kw | 266 | 291 | 343 | ||||
kCal/hr | 228719 | 250215 | 295435 | ||||
Refrigerant | Type | Friendly R407c, R-134a, R-22 | |||||
Control type | Expansion Valve | ||||||
Compressor | Type | Semi-hermetic Screw | |||||
Quantity | 1 | ||||||
Start method | Y-Δ | ||||||
Energy control | 25%-50%-75%-100% | ||||||
Power(kw) | 79.2 | 87.9 | 105.3 | ||||
Condenser | Type | Screw copper coil with aluminum plate fins | |||||
Air fan | Cooling air flow(m3/h) | 100000 | 110000 | 130000 | |||
Type | Low noise axial fans | ||||||
Evaporator | Type | Shell and tube | |||||
Flow rate(m3/h) | 46 | 50 | 59 | ||||
Water Inlet/Outlet pipe diameter (mm) | DN80 | DN80 | DN100 | ||||
Dimension | L*W*H(mm) | 4400*2200*2400 | 4400*2300*2400 | 4750*2200*2450 | |||
N.W | kg | 3800 | 4300 | 5000 |
1). Installed at good air circulation place
2). Chiller design waterproof, put outside without roof
3). Pipe connection design smooth
Consider the chiller size is different, we will arrange full container delivery with plastic foams for chiller package, or wooden case for smaller size chiller
Container | Size |
20 feet container | 5898*2352*2392mm door open size width:2340, height:2280 |
40 feet container | 12032*2352*2390mm, door open size width:2340, height:2280 |
40 HQ | 12032*2352*2680mm, door open size width:2340, height:2580 |
1. Are you manufacturer or Trade Company?
We are OEM professional factory, founded in 2003.
2. What's the order process?
.Inquiry---provide us all clear requirements.
.Quotation---quotation form with all clear specifications.
.Contract confirmation---provide correct contract details.
.Payment terms--- T/T 30% in advanced, balanced before shipment.
.Production---mass production
.Testing: to ensure the quality of the machine
.Shipping--- by sea, train, air or courier. Detailed picture of package will be provided.
.After sales support
3.What terms of payment you use?
T/T, L/C,e-checking, Credit card,etc.
4. Information send to supplier to get the offer
When you send the inquiry to us, pls kindly send it with below technical information.
1)water chiller type: Air cooled or water cooled
2)Cooling capacity: _____ Kcal/hr or _____KW _____Tons
3)Refrigerant: R22 or others
4) Voltages and Frequency : ______V/PH/HZ
5) Inlet and outlet temperature to chiller
5. Can I use our own brand logo on the products?
Yes. We provide OEM/ODM service to our customers. Our professional engineers having rich experience in heat pump design and manufacture. Just tell us your ideas or provide the drawing, we can help you to carry out your ideas.
Whatsapp/ Viber: +8618769762328
Wechat : 18769762328
Skype :libra5813