Plastic White tube rigid PVC tubes 12mm pipe thick 3mm

POM/PVC pipe outer 12mm, Inner 6.5mm 

HDPE pipe outer 12mm, Inner 6.2mm 

Gray PVC Pipe 10mm outer, 8.5mm inner

The Characteristic of PVC, UPVC, CPVC                

Polyvinyl chloride (English: Poly Vinyl Chloride, abbreviated as PVC) is a polymer material that uses a chlorine atom to replace one hydrogen atom in polyethylene. PVC is a white powder with an amorphous structure and a small degree of branching. Industrially produced PVC generally has a molecular weight in the range of 5 to 120,000, and has a large poly dispersity, and the molecular weight increases as the polymerization temperature decreases. There is no fixed melting point, 80~85°C begins to soften, 130°C becomes viscoelastic state, and 160~180°C begins to change into viscous flow state. Its tensile strength is about 60MPa, impact strength is 5~10kJ/m2; it has excellent dielectric properties. Poor stability to light and heat, above 100 ° C or after prolonged exposure to sunlight, it will decompose to produce hydrogen chloride, and automatically catalyze decomposition to cause discoloration. In practical applications, stabilizers must be added to improve the stability to heat and light. PVC is very hard and can only be dissolved in a few solvents such as cyclohexanone, dichloroethane and tetrahydrofuran. It is stable to organic and inorganic acids, alkalis and salts, and its chemical stability decreases with increasing use temperature.

Structure simple:

The structure of this material is as follows: [ - CH2 - CHCl - ]n

The carbon atoms are arranged in a zigzag pattern, and all atoms are connected by a sigma bond. All carbon atoms are designed with sp3 hybrid environmentally friendly and low-consumption plastic pipe design, and PVC plastic pipe is a certain principle for formula design.

1.       Life long durability.

2.       High strength steel reinforced.

3.       High weather resistance even if coastal areas.

4.       Maximum wind resistance.

5.       Termite resistance.

6.       Impact resistance

7.       Fire resistance.

8.       Corrosion resistance.

9.       UV stability or efficient thermal insulation.

10.   High acoustic/sound insulation.  

11.   Water tightness or weather tightness

12.   Pollution proof.

13.   Aging resistance.

14.   100% virgin PVC

15.   Minimum maintenance required.

16.   Highly adaptable to architectural requirement.

The Characteristic of PVC, UPVC, CPVC                

Polyvinyl chloride (English: Poly Vinyl Chloride, abbreviated as PVC) is a polymer material that uses a chlorine atom to replace one hydrogen atom in polyethylene. PVC is a white powder with an amorphous structure and a small degree of branching. Industrially produced PVC generally has a molecular weight in the range of 5 to 120,000, and has a large poly dispersity, and the molecular weight increases as the polymerization temperature decreases. There is no fixed melting point, 80~85°C begins to soften, 130°C becomes viscoelastic state, and 160~180°C begins to change into viscous flow state. Its tensile strength is about 60MPa, impact strength is 5~10kJ/m2; it has excellent dielectric properties. Poor stability to light and heat, above 100 ° C or after prolonged exposure to sunlight, it will decompose to produce hydrogen chloride, and automatically catalyze decomposition to cause discoloration. In practical applications, stabilizers must be added to improve the stability to heat and light. PVC is very hard and can only be dissolved in a few solvents such as cyclohexanone, dichloroethane and tetrahydrofuran. It is stable to organic and inorganic acids, alkalis and salts, and its chemical stability decreases with increasing use temperature.

Structure simple:

The structure of this material is as follows: [ - CH2 - CHCl - ]n

The carbon atoms are arranged in a zigzag pattern, and all atoms are connected by a sigma bond. All carbon atoms are designed with sp3 hybrid environmentally friendly and low-consumption plastic pipe design, and PVC plastic pipe is a certain principle for formula design.

1.       Life long durability.

2.       High strength steel reinforced.

3.       High weather resistance even if coastal areas.

4.       Maximum wind resistance.

5.       Termite resistance.

6.       Impact resistance

7.       Fire resistance.

8.       Corrosion resistance.

9.       UV stability or efficient thermal insulation.

10.   High acoustic/sound insulation.  

11.   Water tightness or weather tightness

12.   Pollution proof.

13.   Aging resistance.

14.   100% virgin PVC

15.   Minimum maintenance required.

16.   Highly adaptable to architectural requirement.

 Please click here to ask more info.

This is OD6mm, ID4mm, wall thickness 1mm

Please click here to ask more info.

Related Products                                                                            

Please click here to ask more info.

FAQ

FREQUENTLY ASKED QUESTIONS

Q1:  Are you the manufacturer for hose?

Yes, we are a professional extrusion manufacturer who was built in 2006.

Q2: What is the MOQ?

Usually our MOQ is amount $1000 per order, but we accept lower quantity for your trial order. Please feel free to tell us how many pieces you need, we will calculate the cost correspondingly, hoping you can place large orders after checking quality of our products and know our service.

Q3: How long is the delivery time?

It takes 7-15 days for MOQ. We have large production capacity, which can ensure fast delivery time even for large quantity.

Q4: Where is the company location?

My company is in Dongguan is located in Guangdong province, China, there are developed traffic and logistics convenience, Near Guangzhou and Shenzhen Port.

Q5: Do you accept OEM/ODM orders?

Sure, we accept OEM / ODM orders.

Q6: Can I get samples?

Yes, we provide samples for free and Buyers need to bear the freight.

Q7: How can I pay?

Usually we make trade on T/T, Western Union etc.

Advantage                     
(1) Good environmental suitability.
(2) Excellent chemical resistance, long service life
(3)The inside pipe wall is extremely smooth and difficult to leave over dirt.
(4)Connected by welding, leakage prohibit
(5)one-stop service, we are a professional extrusion manufacturer in Dongguan City.

Payment terms & Details                     

1. T/T, Western union, etc.

2. Samples lead time: 7 days after spec. confirmed.

3. Mass production lead time: 10-25work days after Order.

4. Pay 30% deposit, pay balance 70% before shipment.

Why choose us                             

1. Our value massage is “Quality is our culture”

2. Our core competencies is silicone products, graphite products, and thermal products.

3. Competitive advantage products.

5. Confidentiality agreement and Business Contract

6. Free sample offer & small order welcomed

7. Quality assurance contract.

8. We are the direct manufacture, which means the price advantage.

9. OEM/ODM Service is available, can design and produce various Non-standard Rubber Parts according to your requirement.

10. One-stop service, we are a professional extrusion manufacturer in Dongguan City.

About us