Plastic Resin HHM5502LW DGDA 6094 6100M high density polyethylene HDPE granules 7000F TR144 DMDA 8007 8008 Virgin HDPE granules

Plastic Resin HHM5502LW DGDA 6094 6100M high density polyethylene HDPE granules 7000F TR144 DMDA 8007 8008 Virgin HDPE granules 

Product Description 

High Density Polyethylene (referred to as "HDPE"), also known as low pressure Polyethylene, is a kind of High crystallinity, non-polar surface shows a certain degree of translucent shape.PE has excellent resistance to most domestic and industrial chemicals. HDPE is a high degree of crystallinity, non-polar thermoplastic resin.High density polyethylene is a kind of white powder granular product, non-toxic, odorless, density in the range of 0.940~0.976 g/cm3;The crystallinity is 80%~90%, the softening point is 125~135℃, the use temperature can reach 100℃;The melting temperature is 120~160℃. For materials with large molecules, the melting temperature range is suggested to be between 200~250℃.It has good heat resistance and cold resistance, good chemical stability, but also has a higher rigidity and toughness, good mechanical strength.Dielectric properties, resistance to environmental stress cracking is also good.The hardness, tensile strength and creep properties of low density polyethylene are better than those of low density polyethylene.Good wear resistance, electrical insulation, toughness and cold resistance, but slightly worse than the low density insulation;Good chemical stability, at room temperature, insoluble in any organic solvents, acid, alkali and various salts corrosion;The film has low permeability to water vapor and air and low water absorption.Aging resistance is poor, environmental cracking resistance is not as good as low density polyethylene, especially thermal oxidation will reduce its performance, so the resin needs to add antioxidants and ultraviolet absorbers to improve the deficiencies in this area.

HDPE granules are usually used for extrusion packaging film, rope, woven nets, fishing nets, water pipes, injection molding lower grade daily necessities and shell, non-load-bearing components, plastic boxes, circulation boxes, extrusion blow molding containers, hollow products, bottles.Used for hollow molding products and blown film products such as food packaging bags, grocery shopping bags, chemical fertilizer lining film, etc.

1.Injection products: turnover boxes, bottle caps, barrels, caps, food containers, plates, dustbins, boxes, and plastic flowers

2.Blow molding products: hollow molding products, such as a variety of series of blow molding barrels, containers, bottles, containing detergents, chemicals, cosmetics, gasoline boxes, daily use products, etc.There are blown film products such as food packaging bags, grocery shopping bags, fertilizer lining film, etc.

3. extruded products: pipe, pipe fittings are mainly used in gas transportation, public water and chemical transportation, such as building materials drainage pipe, gas pipe, hot water pipe, etc. : sheet is mainly used for seats, suitcases, handling containers, etc. 4.Rotation molding: injection molding products such as large containers, storage tanks, barrels, boxes, etc.

5. polyethylene can be processed into film, wire and cable sheath, pipe, a variety of hollow products, injection products, fiber and so on.Widely used in agriculture, packaging, electrical and electronic, machinery, automobiles, daily necessities and other aspects.

 Application of Baotou high density polyethylene granules DMDA-8007 HDPE granules:

DMDA-8007 is a kind of high density polyethylene resin produced by Shenhua Baotou Company. It is mainly suitable for processing of plastic injection products such as circulating boxes, crates, baskets, seats, pallets, food plates, injection molding parts, etc

Related Products

 

                    

             

  

                     

                  

Contact Us