Plastic Spacer is designed according to the requirement of national steel concrete construal design norm. It is widely applied in the civil and industrial construction of buildings, roads, bridges, tunnels, airports, subway and so on.
This kind of Plastic Rebar Chair Spacer is a double cover spacer that has been designed for use in ground floor slabs, where its large base area prevents puncturing of polythene film and gives a stable support to the reinforcing steel.
Item name | Photo | Model No. | Protection Layer | Fit bar size | Packing |
Plastic Rebar Chair Spacer | SP0403B | 25/40mm | 8-22mm | Ton bags | |
SP0653B | 50/65mm | 8-18mm | |||
SP0753B | 75/90mm | ||||
SP1003B | 85/100mm | ||||
SP1053B | 105/110mm | ||||
SP1103B | 110/120mm | ||||
SP1203B | 115/120mm | ||||
SP1303B | 125/130mm | ||||
SP1403B | 135/140mm | ||||
SP1503B | 145/150mm |
Plastic Tubes/Sleeve is a rigid plastic tube used as a spacer between formwork that allows the tie bar to be removed for re-use.
Item Name | Picture | Model No. | Thickness | Diameter | Pack per Bundle |
Plastic tubes | PPW18 | 1.5mm | 18mm | 100m | |
PPW20 | 1.5mm | 20mm | 100m | ||
PPW22 | 1.5mm | 22mm | 100m | ||
PPB18 | 2.0mm | 18mm | 50m | ||
PPB20 | 2.0mm | 20mm | 50m | ||
PPB22 | 2.0mm | 22mm | 50m |
Plastic cones are used on both ends of the plastic spacer tube and can easIly be removed leaving a tapered finish allowing easy grouting and correct cover.
Item Name | Picture | Model No. | Fit bar tie size | Pack per Bag |
Plastic Cone | PC020 | 20mm | 5000PCS | |
PC022 | 22mm | 5000PCS | ||
PC025 | 25mm | 4000PCS | ||
PC026 | 26mm | 2500PCS |
Plastic Rebar End Safety Cap
Plastic Wheel Spacer
Plastic spacers in woven bags; Plastic tube in bundles.
Formwork Tie Rod System
It is one of the most important system in a poured wall project used with various formwork accessories in concrete construction including formwork tie rod, wing nuts, concrete anchor nuts, hex nuts, connection tie nuts, washer plates, formwork wedge clamps, formwork spring clamps, water stopper/water barrier nut, combi plate nut, plastic cones, plastic tubes, etc.
Construction Building Formwork System Accessories Formwork Clamp/Rapid Clamp/Spring Clamp/Wedge Clamp
Material: Carbon Steel/Ductile Iron
Spring Clmap Specification: 75*115*3.75 / 75*110*4 / 70*105*3 / 75*105*3mm, with triangle/rib or not. Other size also available; Unit weight: 310g-430g/pc available
Wedge Clamp: 440g, 500g/pc
Surface Treatment: Galvanized / painted/ electrostatic spraying
Hebei Trico Trade Co., Ltd
Address: Room 1005, No.368 North Youyi Street, Shijiazhuang, Hebei, China
Attn: Angelina Ma
Tel: 86-311-85029502
Fax: 86-311-85029500
Mp: +86 13393113206(WhatsApp)