1. The water tank sink is made of stainless steel2. Pump power and quantity: 4KW × 1 set,
3. Number of vacuum nozzles: 24 (marked in red)
4. The number of cooling nozzles: 24 (marked in blue)
5. Shaped table rail material form and section form: stainless steel sink, mold connecting rail with aluminum alloy profiles, bracket and water collection pipe as one.
6. Position and mode of gas and water nozzle joints: the gas ball valve is below the fuselage, and the water nozzle is on the square tube bracket of the water tank.
7. Electrical control cabinet and operation panel are waterproof
8. Eddy current hair dryer: 1.1KW, used to blow dry surface water stains
9. The front and rear moving device of the shaping table: connected to the shaping table by the screw rod, the screw gear motor power: 0.75KW motor control setting table moves back and forth
10. Position adjustment of the upper and lower positions of the table: screw worm gear box control
11. The other two direction adjustment: the horizontal tilt of the sink and the fine adjustment of the left and right position of the table can be manually controlled
12. The vacuum gauge and water temperature of each zone are displayed by the
vacuum gauge water temperature gauge. 18, shaping station electrical part: contactor: Siemens, air switch: Chint
13. Calibration and cooling flume (10m)