Plastic Blast Media FISCHER JETplast, Type III, Made in Germany, MIL-Specification

“Quality Made in Germany”, “Over 40 Years of Experience” in manufacturing and continuously improving quality of Plastic Blast Media. Establishing the brands name Fischer JETplast® in the world of plastic blast media as a high quality product and, last but not least, with over 10 years of continuous certification by the US Air Force which means we are certified as supplier.

FISCHER is not just manufacturing innovative blasting media but also consulting and attending it's well-known customers professionally in all aspects of applying Plastic Blast Media.

FISCHER makes intensive blasting tests according to customer specification. These tests are carried out in Fischer's own, well equipped test facilities. The blasting cabinets, used for such tests, can also be rented or leased by customers for tests in their own premises or purchased for moderate prices.

FISCHER responds fast, flexible and innovative to customer requests and specifications. This goes for production, modification and application of Plastic Blast Media as well as for after sales service -whenever fast and straightforward solutions are expected.

FISCHER JETplast® has a gentle impact to surfaces without penetrating them – a big advantage compared to standard abrasive blasting media. In order to ensure this gentle blasting effect only fully hardened thermoset moulding compounds filled with cellulose are processed.

FISCHER JETplast® is applied worldwide successfully in many applications in different branches for: cleaning and activating surfaces, depainting, deflashing and preparation of surfaces for high quality painting. Always gentle and effective for brilliant results.

A product with best references!

TYPE II is made of fully (100 %) hardened UREA moulding parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. Type II have been certified by the U.S. Air Force according to MIL-P-85891 and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Many other approvals on request.

TYPE III is made of fully (100 %) hardened MELAMIN moulding parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. Due to the higher hardness compared to Type II it can achieve a higher blast media efficiency. The abrasive consumption is approx. 20 % less compared to the Type II. Type III have been certified by the U.S. Air Force according to MIL-P-85891 and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Many other approvals on request.

TYPE V is made of fully (100 %) hardened ACRYLIC parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. It’s suitable for the shot blasting of soft/thin nonferrous metals and composite parts. The Type V doesn’t produce any harshness on soft metals and galvanic coatings with an approx. 10 % higher stripping rate compared to the Type II. The consumption of blasting media is approx. 50 % less than Type II. Type V have been certified by the U.S. Air Force according to MIL-P-85891 and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Many other approvals on request.

Plastic Blast Media are ecofriendly, reliable and inexpensive. FISCHERJETplast is extremely clean, easily applicable and can be used several times. It is absolutely nontoxic and it's storage time is unlimited. 

Further advantages are:

• Blasting without roughening or deformation of the surface (the media can be adjusted to the object to be blasted)
• Very little expenditure of time (because of sharp particles the surfaces are finished very fast particularly if pressure blasting cabinets are used)
• Long endurance because of up to 30 blasting cycles Chemically inert, therefore no harm to health or environment
• Very limited sticking of dust at the surfaces because of a very efficient antistaticum
• Guaranteed continuously high quality because of strict internal quality management
• Also guaranteed high quality through periodic examination in own and external laboratories
• Certified by TUV-Rheinland according to DIN EN ISO 9001:2008
• Approved for the aircraft- and defense forces by
• U.S. Air Force through the Standard MIL-P-85891
• Approved by the German Defense Forces (Bundeswehr)
• Listed by Rolls Royce
• Approved by Airbus for producing High-quality composite fiber components
• Approved by Pratt & Whitney
• Approved by General Electric
• Approved by MTU
• Approved by Lufthansa Technik AG and many more aeronautics companies in the world
• Approved by the pharmaceutical industry (confirms with the requirements of the European Pharmacopeia)
  

… cleans and activates:

l Composite parts before adhesive bonding as applied in the aircraft industry

l Steel- and chromed moulds of the rubber and plastic industry.

l Aluminum- and steel moulds of the foam plastic industry

l Light metal pressure casting bodies

l Extruder screws and injection die mould tools of the foam plastic industry

l Glass fiber reinforced plastic parts

l Wood surfaces

l Fassades (in particular of historical and ancient monuments)

l Monuments, e.g. from stone, copper or bronze

l Natural and polished stones, e.g. from marble or granite

l Brake linings

l Metal Baking sheets

l Glass surfaces

l Special purpose sieves in sewage treatment plants

l Motor parts

… deflashes:

l Electronic parts and components

l Pressure casted parts

l Foam plastic parts

… depaints:

l Parts and components of aircrafts

l Vintage cars

l Ships hulls and car bodies

l Powder-coated parts

l Aluminum rims

l Improper lacquer finishes applied to high-quality workpieces

l Traffic and instruction signs

l Brass surfaces

l Grey cast iron workpieces

l Parts and components of automobiles

… prepares surfaces for:

l High quality painting of foam plastic parts

l High quality painting of wood surfaces

l High quality painting of metal surfaces