Plaster Stop Beads Micro Plaster Stop Beads External Render Stop Beads

Plaster Stop Beads consists of angle bead and stop edge, its shape looks like "L". Used as a plaster stop to terminate plaster edge in a clear straight line at doors, windows, or other opening. Also used when plaster terminates against dissimilar materials. Expanded flange provides keys and additional reinforcement, Also Available with weep holes. They are mainly used in building materials and plasterwork for outside or corner of concrete columns of wall.

Galvanized for internal use or stainless steel for external use.

Specification

Note:

1. All dimensions can be adjusted according to the customer requirements.

Provides clean, neat edges to 2 coat plaster and render work at opening or abutments onto other wall or ceiling finishes. Designed for thin/single coat plaster and used for the finishing and reinforcing of plaster edges. ABO Plaster Stop Beads is available in four sizes for varying thickness of plaster depth-10, 13,16, and 19mm.

Galvanized for internal use or stainless steel for external use.

Competitive Advantages

Good and High Quality Control 

Prompt Delivery 

New Product 

Competitive Prices 

Earth-friendly Products

The installation of ABO beads shoule be in accordance with BS5492:1990(internal) and BS 5492:1991(external).

Beads should be fixed using plaster dabs or mechanical fixing at a maximum of 600mm intervals. Beads can also be fixed to lath sheets by the use of galvanised or stainless steel tye wire.

Use tinsnips to cut the bead wings and a fine toothed saw to cut the nosing.

Care should be taken to ensure that steel beads are kept dry, and stroed and handled in a way to prevent distortion and general damage, especially to the galvanized coating. This means storing them off the ground on a flat surface.

The risk of corrosion in galvanised beads will normally only become apparent during the initial drying out period of the plaster, which should be kept to an absolute minimum (maximum5-7days), and subsequently during periods of heavy condensation and dampness.

All metal comppnets used in a particular installation must be of all the same material type, i.e stainless fixings with stainless beads/sheets and galvanised fixings for galvanised beads and sheets.