Introduction:
The quick change tool post is a main accessory of the machine tool, it is consist of tool post and many kinds of tool holders, according to the processing requirements of the workpieces,correspording tool holders are selected to finish cylindrical facing,end facing,cutting,drilling,reaming, boring as well as other processing. It realizes to mount tool outside the machine tool, it has exchange tool quickly, high precision, rigidity strong etc. It is satisfactory accessories in place of square turrets.
Specification:
Precision Piston Type Tool Post Sets consist of one precision Tool Post Plus Five Tool Holders.
Tool Post Sets
Item NO | Composition of the sets | Fits Lathe swing |
551-100 | 550-100, 550-101, 550-102, 550-104, 550-107, 550-110 | 12" |
551-200 | 550-200, 550-201, 550-202, 550-204, 550-207, 550-210 | 10"-15" |
551-300 | 550-300, 550-301, 550-302, 550-304, 550-307, 550-310 | 13"-18" |
551-400 | 550-100, 550-301, 550-302, 550-304, 550-307, 550-310 | 14"-20" |
PISTON TYPE LOCKING TOOL POST
Item No | A(in) | B(in) | C(in) | D(in) | Swing dia(in) | Wt(kg) |
550-100 | 2-1/2 | 3-7/8 | 2-1/4 | 9/16 | 12 | 2.23 |
550-200 | 3 | 4-5/8 | 2-3/4 | 5/8 | 10-15 | 4 |
550-300 | 3-3/8 | 5-1/8 | 3 | 3/4 | 13-18 | 5.72 |
550-400 | 4 | 6-1/4 | 3-5/8 | 7/8 | 14-20 | 10 |
TURNING AND FACING HOLDER
Item No | A(in) | B(in) | C(in) | D(in) | Tool bit range(in) | Wt(kg) |
550-101 | 1 | 1/2 | 29/64 | 1-1/2 | 3/16-1/2 | 0.4 |
550-201 | 1-1/8 | 5/8 | 1/2 | 1-3/4 | 1/4-5/8 | 0.7 |
550-301 | 1-7/16 | 3/4 | 5/8 | 2-1/8 | 1/2-3/4 | 1.11 |
550-401 | 1-23/32 | 1 | 3/4 | 2-1/2 | 1/2-1 | 1.75 |
TURNING BORING AND FACING HOLDER
Item No | A(in) | B(in) | C(in) | D(in) | Tool bit range(in) | Wt(kg) |
550-102 | 1 | 1/2 | 29/64 | 1-1/2 | 3/16-1/2 | 0.4 |
550-202 | 1-1/8 | 5/8 | 1/2 | 1-3/4 | 1/4-5/8 | 0.7 |
550-302 | 1-7/16 | 3/4 | 5/8 | 2-1/8 | 1/2-3/4 | 1.11 |
550-402 | 1-23/32 | 1 | 3/4 | 2-1/2 | 1/2-1 | 1.75 |
V groove hold round shank boring bars and tools as well as square tool bits to machine end face,external,cutting,boring etc.
HEAVY DUTY BORING BAR HOLDER
Item No | A(in) | B(in) | C(in) | D(in) | Wt(kg) |
550-104 | 3/4 | 1-1/2 | 5/8 | 3/4 | 0.9 |
550-204 | 7/8 | 1-3/4 | 3/4 | 1 | 1.52 |
550-304 | 1 | 2 | 3/4 | 1 | 2.16 |
550-404 | 1-1/4 | 2-1/2 | 1 | 1-1/4 | 3.47 |
550-141 | 7/8 | 1-3/4 | 3/4 | 1 | 1.35 |
550-241 | 1 | 2 | 1 | 1-1/4 | 2.12 |
550-341 | 1-1/8 | 2-1/4 | 1 | 1-1/4 | 3.05 |
550-441 | 1-3/8 | 2-3/4 | 1-1/4 | 1-1/2 | 4.35 |
Use straight shank drilling and reaming, boring etc.Equipped with a split bushing to accommadate a boring bar of small diameter.It grips with extreme rigidity.Cuts smoothly without chatter.
UNIVERSAL PARTING BLADE TOOL HOLDER
Item No | A(in) | B(in) | C(in) | Blade Height(in) | Wt(kg) |
550-107 | 3/16 | 1/2 | 1-1/2 | 1/2 | 0.53 |
550-207 | 3/16 | 11/16 | 1-3/4 | 11/16 | 0.9 |
550-307 | 3/16 | 3/4 | 2 | 3/4 | 1.2 |
550-407 | 1/4 | 7/8 | 2-1/2 | 7/8 | 1.82 |
Use square tool to make slot cut off etc.
KNURNING & FACING HOLDER
Item No | A(in) | B(in) | C(in) | Clamping range(in) | Tool bit range(in) | Wt(kg) |
550-110 | 7/8 | 2-1/2 | 1-9/16 | 3/16-1/2 | 3/4*3/8*1/4 | 0.48 |
550-210 | 1 | 2- 5/8 | 1-3/4 | 1/4-5/8 | 0.85 | |
550-310 | 1-3/16 | 3-1/8 | 2 | 1/2-3/4 | 1.15 | |
550-410 | 1-7/16 | 3-3/4 | 2-1/2 | 1/2-1 | 1.95 |
It may be used for knuring,if square tool is used,it may process end face,extered cutting,boring etc.