Use a laser printer to print a prepared sample on the sulfuric acid paper or film
Cover the exposure film according to the specifications of the sample
Print the sample, exposure film and stamp pad, the right order is as follows: put the sample that is close to the photosensitive glass at the bottom, print side up, the middle layer is the exposure film, and the third layer is stamp pad. The three should be followed by a smooth close contact, no interstitial folding. Cover the light shield of seal machine with the handle and pull it tight.
Turn on the power switch, and the photosensitive machine starts charging.
The machine take random exposure modecan according to the voltmeter shows. Exposure voltage range from 160V to 320V. For the initial use, it is recommended that the user first use the scrap to test out the best exposure voltage value for the stamp pad. When the charging indicator of the seal machine to reach the required exposure voltage of the stamp pad, turn off the power, and press the trigger button to complete the exposure.
Unclasp the handle, open the light shield, take the exposured stamp pad out, and scrape off the film
Put the pad into the stamp holder, inject ink, a stamp is done.
Application:
Photosensitive seal machine can make all kinds of photosensitive seals, portrait seals, business card seals, cartoon seals, and it can widely used in seals industry, portrait seals shop, tourism places, photocopy shops.
Features
Reasonable design, lightweight, compact frame
Applied to make photosensitive stamp
Adopt optical principles to print characters and logo on the special light-sensitive mat
Don't need ink pad and ink, and the ink can be refilled continuously
Seal impression is clear and does not deform. The pressure of sealing will not affect seal impression.
The ink does not expand and the color does not fade, and it dries upon sealing