Perfect Anti-dead zone H Bridge 12V 24V 36V 20A 450W PWM DC motor speed controller switch with PLC & 3.3V 5V IO SCM interface

Bigger qty,better price.

Please contact with me!!!

We produce MODULE ! CUSTOM-MADE module is OK! Our company produce your own board!

Perfect Anti-dead zone H Bridge 12V 24V 36V 20A 450W PWM DC motor speed controller switch with PLC & 3.3V 5V IO SCM interface

-----------------------------------------------------------------------------------------------------------------
PRODUCT PICTURE

------------------------------------------------------------------------------------------------------------------
PRODUCT FEATURE

The driver module features:

Small size, only 6.6cm * 3.8cm 1cm thick paste well after cooling the total height is 2.8cm

Support 10-36V voltage range, undervoltage protectionindependent power supply up to 50V

Maximum continuous load current of 20A (with good simple radiator), short time peak current of 110A

Three line speed control, positive inversion and brake

Support full PWM, can be directly used button control reversal,PWM 0%~100.0% range

It can directly control and PLC and 3.3V 5V microcontroller IO portwith Bi

The built-in interface level buffer function, no need to worry aboutthe damage of SCM IO

Scope: large car, robot, various control

The parameters of the motor drive module:

Properties: H bridge module has high power DC motor brushless DC motor driving module for 3-36V

Scope of application: high power DC motor drive. A wide input voltage (11-36V) requirements of the occasion. As with high inputvoltage such as 60V drive board please contact the owner.

The driving voltage: 11-36V DC voltage input DC. (disable inputAC)

Output current: rated continuous output 24V 15A 360W below themaximum 36V 15A 450W without radiator

Output power: natural cooling rated 450W power supply for 36Vmeasured at 15A

Working temperature: industrial grade (-40 DEG to +85 DEG C)loaded with temperature: 45 C

The driver module features:

(1) imported full bridge driver chip + low pass resistance 110ANMOS drive pipe, easy to achieve motor brake, reversing.

(2) the chip operating frequency up to 1MHZ, very good solutionMC33886 and VNH3SP30 so that the electrical noise and the heating problems, at the same time driving ability have been improved obviously, fast response speed. The drive performance of non L298, IR2104, MC33887 motor drive chip can compare

(3) two PWM input, the duty ratio can be in 0-100%, is generallydriven by the unattainable. With instant braking ability and to help you easily achieve precise control of the entire speed.

(4) can be used in working voltage of 10.5-36V and wider, suitable for lithium battery powered directly driven robot or car modelcontest!

(5) built-in logic buffer isolation circuit. The perfect support for PLCand various types of 3V or 5V microcontroller IO port directlycontrol, can also through the analog voltage input control motor brake and positive inversion.

(6) control is very simple and convenient to use, only need toconnect 3 input line can control the motor braking and reversing.

(7) chip with built-in hardware dead time control, able to adapt tofrequent commutation motor effective protection of H bridge, avoiddirect damage, thus the software programming easier.

(8) the chip operating frequency up to 1MHZ, suitable for hollowwith motor drive, low noise, low fever.

Statement: recently found a lot of profiteers copy our R & D products Taobao, look very similar, some even describe theproduct parameters are copied directly. The profiteers itself is notproficient in technology, the general is to rely on price war to attract the eye under the banner of! Using domestic inferior device posing as imported components to make profits! Plus support service providing customer service technology can not, more lack ofinstrument and equipment of EMI, EMC on the performance of the product itself, the reliability test of destructive and aging and so onvarious parameters, stability and reliability which can not guaranteeproduct quality. Please look for our shop: Austrian Deli science and technology! Beware of cheated! The drive plate for the owner ofindependent R & D and production, it is strictly prohibited to copy board and stolen pictures, imitation purposes, the consequences!Please support the original design! Thank you.

EN: enable end

PWML1: forward control

PWML2: inversion of control

GND: power supply wire

The output end:

VIN+: drive board power supply anode input 10V-36V

GND: driver board power supply input negative

M+: is connected to the motor line

M-: is connected to the motor line

The following is a description of the way the use of two kinds ofcontrol:

Level control mode:

EN=0 PWML1=0 PWML2=1 motor is transferred

EN=0 PWML1=1 PWML2=0 motor reversal

EN=0 PWML1=1 PWML2=1 motor brake

EN=1 PWML1=1 PWML2=1 motor free

The PWM control mode:

EN=0 PWML1= duty cycle adjustable PWM signal PWML2=1motor is transferred (to change the duty ratio is adjustable speed)

EN=0 PWML1=1 PWML2= occupies emptiescompared adjustablePWM signal of the motor reversal (changing the duty ratio isadjustable speed)

EN=0 PWML1=1 PWML2=1 motor brake

EN=1 PWML1=1 PWML2=1 motor free

-----------------------------------------------------------------------------------------------------------------
SHIPPING TERMS

1.Ship to whole world : DHL , UPS, FEDEX, EMS, HKPOST, SGPOST,SWPOST

2.Lead time:2days. If we don't have stock at that time, it takes 2-4days to produce it.

 ------------------------------------------------------------------------------------------------------------------
PAYMENT TERMS

1.We accept PAYPAL, TT, WESTERN UNION, ESCROW

2.Commission:
   *Paypal: total sum *0.041
   *Escrow: total sum *0.05
   *TT: $28-$45(according to amount)
   *Western union: $0

---------------------------------------------------------------------------------------------------------------------
GUARANTEE PERIOD

    3 Months, if the quality have any problems, We have a good after sale

service team will slove the quality problems for you.

1.If you test the products and it doesn't work, pls keep it and send it to us in 

   1 month, we will send the good one to you with the following order.

2.If the product is already used by you, then no warranty.

3.If the product is broken by man-made, then no warranty.

----------------------------------------------------------------------------------------------------------------------
CONTACT US