Peel Bond Strength Tester PET Strap/PP Strap Tensile Testing Machine
Introduction
90/180 peeling strength test machine tester is designed and manufacture in accordance with the relevant GB17200 specification, performance indicators in line with the GB/T2790 (adhesive 180 ° peel strength test),GB/T2791 T peel strength test (adhesive), GB2792 (pressure sensitive adhesive tapes 180 ° peel strength measurement), GB4850 signals.a strength test (low speed), GB7754 (shear strength test), GB8808 (composite film peel strength test), ZBY28004 (heat sealing strength measurement), GB13022 tensile test (film), GB7753 (pressure sensitive adhesive tape pull test) test methods such as request.
90/180 peeling strength test machine tester can do all kinds of paper, film, rubber, plastic, fabric, waterproof material, non-woven fabrics, metal wire, metal foil,. Metal mechanics, and the longitudinal and transverse tensile, tensile and tear properties and mechanical properties test, composite film, pressure sensitive adhesive materials such as stripping, splitting, shear strength test, elongation at break test, heat sealing tensile, tear, strength test, etc.
Features
1.Provide the capacity of two groups of test space, let the operator has a bigger scope, especially the raw material and finished product testing strength gap is bigger, the most suitable. On the type of be born type, mainly in the steel wire, small screw type of fabric and other industries the most commonly used. The biggest test of 50 kn force, long stroke and has two test space, can be installed capacity of two different sensors, used in testing strength difference is very big occasions, such as in the spring industry, steel wire, rubber and plastic materials such as the analysis of the test.
2.It can be pulled off automatically and the peak is maintained;Measuring strength of tension, pressure and input parameters;The tensile force value is determined, and the force value is elongated.Display curve (force value, displacement);Single point speed regulation (1 -- 500mm/min), single point speed regulation (1, 2, 5, 10, 20, 50, 100, 200, 500), stepless speed regulation can be set to any accuracy within 1 -- 500 range.The accuracy of each measurement is plus or minus 1%.The machine adopts closed-loop control method with high control precision.
Capacity Choose |
10KG,20KG,50KG,100KG,200KG,500KG Optional |
Accuracy Level |
0.5Level |
Effective force measure |
0.4%~100% |
Force accuracy |
±0.5% |
Resolution |
Max load 1/±250000 |
Load cell |
Basic configuration: tension and pressure sensors (maximum load) |
Effective test widty |
150mm |
Total Column height |
1000mm |
Effective tensile stroke |
500mm |
Test speed range |
0.1~500mm/min |
Motor |
Servo Motor |
Displacement measure accuracy |
±0.5% |
Safety device |
Electron limit protection |
Test table return function |
Manual or automatic options, automatic or manual return to the initial position of the test after the end of the test |
Over load protection |
Over 10% of maximum load, automatic protection |
Clamping fixture |
Tensile fixture 1set |
Machine size |
420×350×1350mm |
Motor |
220V±10% 0.2KW/0.4KW |
Weight |
70 Kg |
Software Technical Parameters:
1. Adopt the Windows work platform, and the parameter setting is handled in the form of dialog box, and the operation is simple;
2. Using a single image operation, no screen switching is required;
3. The software interface has many languages in Chinese and English.
4. Self-regulation test form mode;
5. Test data can be directly called in the main screen;
6. The data comparison of multiple curves can be carried out by means of translation and comparison.
7. There are various measuring units of KGF, LBF, N, KN, KPa and Mpa.
8. Automatic return function;
9. Automatic calibration function, with input direct switching;
10. Function of self-defining test method;
11. Experimental data operation analysis function;
12. Functions of automatic magnification ratio of 1, 2, 5, 10, 20, 50 and 100, in order to achieve the most appropriate size of the graph automatic switching, data acquisition frequency of 6000HZ;
1.Packaging:
Ply-wooden cases, inner plastic films wrapped, Sometimes we use wooden case, sometimes we use carton case. it depent how weight the machine is.
2.Shipping:
We usually send the goods to you by air, we can also delivery the equipment by sea or by express. it depends on customer.
Dongguan Yaoke Instrument Equipment Co.,Ltd is specialize in rubber and plastic testing machine over 10 years,With our advanced technologies and best customer service, Our product has exported to more than 100 countries and regions,which win favorable comments from customers worldwide.
Our production line have turning machine,griding machine,milling machine,CNC machining center and sheet metal bending machine,design department has 5 people special for design and research new product.With these advantages,we can control product quality from source.
If you have any inquiry or concern,Sales and after service department will reply you within 24 hours.
It will perform tests in conduct tensile, compression,bending, shearing, bonding strength, peeling, tearing and other tests. It is suitable for rubber, plastic,leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials.
The key products from YaoKe range include universal testing machines,Cell phone/computer/switch testing machines,Insertion Force Pull Strength Tester,Battery Testing Equipments, Bicycle Test Equipment,Climatic Testing Chambers, Packing and Paper Printing Testers,hardness testers, and fabric and textile testers,Rubber&Plastic Testing Instruments, Leather and Shoes Testers, as well as Transportation, Basketball/badminton testing machine, and much more.
1.What’s your MOQ?
At present we haven’t strict policy for this, so welcome orders with any quantity.
2. Are you a manufacturer or trade company?
We are a manufacturer. You can assure that we are a producer with full experience doing business in domestic and oversea.
3. We are not professional for operation and installation of your machine?
While it is not a stumbling block, our machine is easy to operate, no need to professional training, and the instruction manual and video sent to you are enough. What’s more, we have professional engineers and they can solve all questions.
4. How about packaging? If machine damaged, what should I do ?
Usually machine is packed with wooden case and standard export carton, plywood carton or as your requirement. Damage haven’t happened before, if happen, we will arrange replacement.
5. We haven’t do business before, how can I trust your company and machine?
We have been GOLD supplier for five years with no complaints on Alibaba. and our machine have exported to many countries and have a good feedback.
6. If I want to visit your factory, is the traffic convenient ?
Our company traffic is very convenient, it is only 20 minutes by car or taxi from our city airport to our company, if you come, we can pick you up in airport.
7. Does your product have CE certification ?
Yes, all our products passed CE certification
8. If there is not any size meet my need, can I customiz ?
Yes, just provide me your detail requirement, we can do as yours.
How to contact us?
Send your inquiry details in the below, click " Send" Now!