Rotary drum flaker, it is a kind of cooling and crystallization process, the fluid in feeding tray contacted with the surface of
cooled drum and form the material film on the surfuace of rotary drum, then the material film was cooled and crystallized by the heat exchange between the fluid and drum wall, the crystallized material was scraped off by the scraper in the status of flakes.
It is applicable to the flake solid transformed from the high-temperature fluid via the cold and heat exchange on the moving surface of the inner cooling roller. It can be universally used in chemical industry and pharmacy.
flaker is mainly composed of dryer body, scraper, driving system, water chilling unit, product discharge system and control system etc.
Advantage of Flaker
- High heating efficiency
- Wide application
- Short drying time
- Easy operation
Application
- Chemical product
- Dyes
- Food
- Pharmaceutical product
- Cloth
- Food
FEATURES
1.High heat efficiency: The heat transfer of the cylinder dryer is heat conduction and the conducting direction keeps identical with operation circle. Most of the heats can be used for evaporation of wet materials on the wall the cylinder. The efficiency can reach 70-80%.
2.Flexible operation elasticity and wide application: Various drying factors of the dryer can be adjusted, such as concentration of the liquid, thickness of material film, temperature of heating medium, rotating speed of the drum, and etc. These factors can change drying efficiency of the cylinder dryer. As these factors have no interrelations each other, it brings great convenience to dry operation and makes it applicable to dry different materials and meet different production requirements.
3.Short drying period: The drying period of materials is normally 10 to 300 seconds, so it is suitable for heat-sensitive
materials. It also can be pressure reducing operated if it is put in vacuum vessel.
4.Fast drying rate: The thickness of the material film on the wall of the cylinder is very thin. Normal, thickness is 0.3 to
1.5mm. The directions of heat and mass transmittal are identical so the evaporation strength on the surface of material film can be 20-70 kg.H2O/m2.h.
1) Plywood case packing if necessery.
2) Packed by plastic bags if for very big machines.
3) Trade term: FOB or CIF.
4) Sea shipping.
About Lead Time
A------Usually it takes about 30-40 days after we receive your down payment and drawing confirmation. About Payment Term
A------By T/T in Advance, or Irrevocable L/C as Sight.
Our machines can be customized, leave an inquiry to know more details about price, packing and shipping.