(1)Crude palm oil standard:
FFA : |
Less than 5 % |
Moisture : |
Less than 0.1 % |
Dirt: |
Less than 0.02 % |
(2)Kernel Standard :
Broken Kernel: |
Less than 15 % |
Moisture: |
Less than 7 % |
Dirt: |
Less than 6 % |
Palm oil production line Description
The palm oil is contained in palm pulp, the pulp is high moisture content and rich lipase. Usually we adopt the method of press to produce it, and this technology is very mature. Before press , Fresh fruit bunch will be taken sterilizer and thresher pretreatment : After weighting the FFB , it is loaded the FFB conveyor by loading ramp, then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be heated and sterilized treatment for several time to avoid the lipase be hydrolyzed , after sterilizer ,the FFB is distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm fruit and bunch , for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the factory area at fixed period , the empty bunch could be used as fertilizer and repeat use ; The palm fruit which has passed sterilizer and thresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) form the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand trap tank and treated by the vibrating screen ,afterward the CPO will be sent to clarification station treatment section . For the wet fibre cake which be produced by screw press, after separating nut, it will be sent to boiler house to burnt.
The wet fiber cake contain wet fiber and wet nut, the fiber contain about 6-7% oil and fat and a few of water .Before we produce the nut, we should separate the nut and fiber .
Firstly, the wet fiber and wet nut enter the cake breaker conveyor to be cracked, and mostly of the fiber should be separated by pneumatic fiber depericarper System. The nut, little fiber and big impurity will be further separated by the polishing drum.
The separated nut should be sent to nut hopper through the pneumatic nut transport system, and then adopt the ripple mill to crack the nut, after cracking , most of the shell and kernel will be separated by cracked mixture separating system, and the rest of mixture of kernel & shell enter to the special clay bath separating system to separate them, after this processing , we could get pure kernel(The shell content in kernel <6%),which should be conveyed to the kernel silo to dry.
After dried moisture as 7%, the kernel will be conveyed to kernel storage bin for storage; Usually the dry kernel’s capacity ratio is 4% . So it should be collected until enough quantity, and then be sent to the palm kernel oil mill; For the separated shell, it should be conveyed to shell temporary bin as the spare boiler fuel.
After screen and sand trap tank, the palm oil should be sent to crude oil tank and heat , then be pumped continuous clarification tank to separate the purified oil which be sent to pure oil tank and the sludge oil which be sent to sludge tank , whereafter the sludge oil should be pumped to the centrifuge to separate, the separated oil enter the continuous clarification tank again; The pure oil in the pure oil tank should be sent to the oil purifier , and then enter the vacuum dryer , at last the dried oil should be pumped collection tank.
Huatai Machinery, the full name is Henan Huatai Cereals and Oils Machinery Co., Ltd. Located in Hua County industry Zone of Henan Province. Covering an area of 150,000 sqm, with total investment RMB360 millions, has a modern standard plant and advanced processing equipment, is a research and development, design, manufacture, guidance, installation as one of the major cereals and oil machinery manufacturing enterprise.
Rich experience of large overseas projects
Dozens of certificates and honors
Sudan |
30T/D Peanut Oil Pressing and 15T/D Peanut Oil Refinery Project in Sudan |
Ethiopia |
Ethiopia 30T Sesame Oil Mill Machine |
Egypt |
2015 Henan Huatai Singed 100TPD Soybean Pretreatment and Soybean Oil Extraction Equipment in Egypt |
Swaziland |
2015 Henan Huatai 30T Soybean Oil Refining Equipment in Swaziland |
Nigeria |
2015 Henan Huatai Singed 50TPD Peanut pretreatment and 15TPD Peanut Oil Refining Equipment in Nigeria |
Russia |
2015 Henan Huatai Singed 50TPD Soybean Oil Production Line in Russia |
Ethiopia |
2015 Henan Huatai Singed 50TPD Fully Continuous Sunflower Oil Refining Equipment in Ethiopia |
Uzbekistan |
2015 Henan Huatai Singed 50T oilseeds pretreatment and oil extraction and oil refining in Uzbekistan |
Nigeria |
2015 Henan Huatai Singed 20T Semi-continuous Palm Oil Physical Refining Equipment in Nigeria |
Peru |
2015 Henan Huatai Palm Oil Physical Deacidification and Deodorization Equipment in Peru |