Palm kernel shell malaysia palm kernel shell separator palm kernel cracker and shell separator
Our palm kernel cracker and separator system is our company newly developed palm oil project mating system.
This system abandoned traditional technology, adopts cracking and air separator method, it is high efficiency and no pollution. Especially for like palm kernel (Shell thickness ≤1.4mm),
After crushing the palm nut, the shell and kernel weight is very close; To separate it is a very complicated process; We adopt professional palm kernel cracker, crushing rate is above 90%; Then use air separator system, through adjusting the transducer to control high pressure air speed and volume; When the speed and air volume arrive the critical value, which can separate the shell and kernel; Kernel in shell rate is less than 5%; shell in kernel rate is less than 5%; This system is mainly for cracking and separating palm kernel.
(1)Different with the small one, the large palm nuts shelling machine is with big capacity and equipped with an elevator to transmit materials and a barrel.
(2) Palm nuts cracking and separating machine cracks nuts hard shell at one time, with grading system, shelling completely and no broken kernels.
(3) The large palm nuts separating machine separates shells and kernels completely at one time with kernels pure and clean finally.
(4) Palm nuts cracking and separating machine is professionally used for separating meat from hard-shelled nuts, such as palm nuts, walnuts, cashew nuts, almonds and other types of hard-shelled nuts.
Machine parts:
Advantages of palm kernel cracker and separator machine:
1. Taking advantage of different gravity of shell and kernel to separate
2. High shelling rate over 95%
3. Good quality, suitable for different nuts
4. Easy operation. Just put the mixture in the shaft, then kernel and shell will flow from two sides.
5. Reasonable design and low broken rate
1. Q:If you want to separate palm kernel and shell ,May I know how many tons of palm kernel you want to process per hour ?
A:We can design suitable project according to your requirement
2 Q: The materials of our machine?
A: The stainless steel and carbon steel.
3. Q: How long is the warranty?
A: 1 year.
4. Q: Can you install the machine in local place.
A: We will send our engineers to local place to help installing the machine.
5. Q: How to operate the machines?
A: Our engineers will train the worker how to operate it after running.