PWM to Voltage Converter Module 0%-100% to 0-10V for PLC MCU Digital to Analog Signal PWM Adjustabl Converter Power Module
1. Description:
The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.
It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM. The modules are small in size and easy to use in different places.
2. Features:
1>. MCU embedded technology
2>. Easy to operate, fine tuned by potentiometer
3>. Select the PWM signal input level range through short-circuit
4>. The module is smaller, easy to carry and use
3. Parameter:
1>. Work Voltage:DC 12V-30V; (> 100MA)
2>. PWM Receiver Frequency:1KHZ-3KHZ
3>. PWM signal input level range:
The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU
The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller
4>. Conversion range:0%-100% PWM to 0-10V
5>. Allowable error:5%
4. Hardware Interface:
VCC | DC 12V-30V |
GND | Ground |
PWM | Positive of PWM input signal |
GND | Negative of input signal |
VOUT | Output Voltage 0-10V |
GND | Output Voltage Ground |
|
5. Operation instructions:
After power on, without input signal, the output is 0V, so only input can output.
The first time when the power is on, it is best to do a calibration debugging:Input a 50% duty ratio signal to PWM/GND and adjust the relative amplitude short cap. The frequency is 1KHZ-3KHZ, Measured VOUT and GND with a multimeter and it will display 5V. Adjust potentiometer to make sure display 5.00V on multimeter. This will calibrate your pulse signal to this module.
When the frequency changes, the correspondences may be offset and need to be re calibrated.
The output voltage can be adjusted by adjusting the duty ratio.
The accuracy can be controlled by adjusting the potentiometer.
What's our Packing Way?
Our professional packing team- Let you rest assured
What's the delivery Way&How to check?
1. Ship within 3 workdays while receiving the payment
2. Shipment Terms: UPS, DHL, FEDEX, TNT, EMS, China/HK Post or any ways you prefer.
3. Provide the Tracking number while shipping the products; you can check your parcels online.
Why choose us?
1.We are Alibaba Assessed Gold Supplier.
2. We have best quality control, Best Service and competitive Price.
3.100% QC inspection Before Shipment.
4 100% New &Original.
What's the Price?
1. All the prices are FOB Shenzhen Price
2. Some part’s price is unstable according to the market, please feel free to contact us for the Latest and Best price.
What's the Payment Method?
1. TT (Bank Wired), PayPal, Western Union, Escrow.
2. The buyer is responsible for all the shipping cost incurred.
3. If you prefer to other payment terms, please contact us.
What's the Refund&Replacement?
If there are any quality problems, please make sure all these items must be returned in their original condition to qualify for a refund or replacement. (Any used or damaged items can not be refunded or replaced).
How is our QC Team?
1.More than 1000,000 own stock inventory to meet your needs of different products.
We specialize in various types of Modules.Active electronic components(Integrated Circuits, , Relay, Sensors, and etc)and Passive electronic components (Filter, Magnetic Bead.Diodes, Transistors, Capacitors, Resistors, Inductors, and etc) over 10 years.
2. Competitive priceadvantage helps tosave your purchase cost and your precious time.
We wholesale and distribute new,original &famous brand Electronic Components all over the world.
3.Own the international advanced testing equipment of electronic components and scientific storage system to ensure the quality stability.
4.Excellent elite team, more than 6 years seniority, and a good understanding of international market trends.
Q1.What is the minimum order quantity for your products?
A1.Minimum order quantity starts from ONE piece .
Q2. How can we get samples from you ?
A2.Samples are available. Normally we take 2 days to arrange samples. If we have no business record with you before, we need to charge boot samples cost and post courier freight.
Q3.When will you send the parts to me?
A3.We will send the parts to you within 3-5 workdays after receiving your payment.
Any other more questions, please feel free to contact us. We are always at your service !