Injection Part | Item/type | Unit | SK350 - PVC | ||
Screw type | A | D | |||
Screw diameter | mm | 70 | 75 | ||
Screw diame-ter ratio | L/D | 21.5 | 20 | ||
Theoretical injection volume | cm³ | 1250 | 1435 | ||
Injection volume (PS) | g | 1138 | 1306 | ||
Maximum rate for inject-ion to air | cm³/s | 350 | 403 | ||
Injection pressure | MPa | 152 | 132 | ||
Injection stroke | mm | 325 | |||
Maximum injection speed | mm/s | 92 | |||
Maximal Rotational Speed of Screw | r/min | 182 | |||
Clamping Part | Clamp Tonnage | KN | 3500 | ||
Toggle stroke | mm | 700 | |||
Distance between tie bars | mmxmm | 713x660 | |||
Maximum mould height | mm | 730 | |||
Minimum mould height | mm | 330 | |||
Ejection stroke | mm | 190 | |||
Ejector force forward | KN | 113 | |||
Ejector force backard | KN | 82 | |||
Amount of die thimble | Pcs | 1+12 | |||
System pressure | Mpa | 17.5 | |||
Motor power | KW | 37 | |||
Heater power | KW | 24.95 | |||
Quantity of temperature-control zones | 1+5 | ||||
Bucket capacity | KG | 50 | |||
Oil tank capacity | L | 520 | |||
Boundary dimension(L×W×H) | m | 7.1x1.75x2.2 | |||
Machine weight | Ton | 13 |