Input specification | ||
PV Input | ||
Maximum Input DC Voltage | 800VDC | |
Recommended Voc Range | 500~700VDC | |
Recommended MPPT Voltage Range | 450~600VDC | |
Starting Voltage Range | 250~800VDC | |
Grid or backup generator input | ||
Input Voltage | Three phase 380V(-15%~30%) | |
Output specification | ||
Rated output voltage | 3PH 380V | |
Output frequency | 0~600.00Hz(Default 0~50.00Hz) | |
Protection | ||
Built-in Protection | Lighting Protection, over-current, overvoltage, output phase-lose, under-load, under-voltage, short circuit, overheating, water pump run dry etc. | |
General Parameters | ||
Application Site | No direct sunshine, no dust、corrosive gas、combustible gas、oil mist、steam、dripping or salinity etc. | |
Altitude | 0~2000 m Derated use above 1000m,per 100m, the rated output current decrease 1%. | |
Environment Temperature | -10℃~40℃ (Environment Temperature be 40℃~50℃, please keep derated use.) | |
Humidity | 5~95%,non-condensation | |
Vibration | less than 5.9 m/s2(0.6g) | |
Storage Temperature | -20℃~+70℃ | |
Efficiency | Rated Power Run≥93% | |
Installation | Wall or rail mounting | |
Protection Grade | IP20 | |
Cooling | Forced Air Cooling |