PU8630 Peru side window of motorbus adhesive auto glass polyurethane sealant pu glue

PU8630 is one component polyurethane adhesive used in variety bonding and sealing.

Key Features

1.  No black water flowing after applying sealant (using the low purity shampoo to assist the operation)
2. Low odor, environmental & health
3. Bond very well with surface of variety material such as all kinds of metal, lumber, glass, polyurethane, epoxy, resin, and coating material, etc.
4. One component adhesive with fabulous thixotropy, it’s convenient to apply with rapid curing speed
5. Excellent water, weather and aging resistance
6. Excellent wear-resisting property
7. Paintable and polishable
8. No sag or flow phenomena within 30mm perpends
9. Primerless

Typical Applications

1.  Specially used for windshield and side glass of bus, car, ship, engineering machinery vehicle, carriage and special vehicle
2. Also use for bonding glass steel and plastic accessories (car roof, side body and car front)
3. Very popular in repair market

Technical Data Table

Directions for Use

Operation:Clean before operation

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

Direction of operation

Tool:Manual or pneumatic plunger caulking gun

For cartridge

1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength

For sausage

1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength

1.Obtain a new windshield.
2.Remove the plastic surround side and top mouldings correctly.
3.Cut the urethane from the outside between the glass and the pinchweld.
4.Apply a windshield primer to the frit band.
5.Apply the urethane with an electric caulking gun.
6.Lift the windshield into place.
7.Push the window down around the frame to guarantee a tight bond.
8.Allow the urethane to dry.

Package & Storage

1.Q:Delivery time ?

A: Normally,delivery time of sample order is 7 to 10 days,
standard order is 15-20 days.

2.Q:How to get samples ?

A: Normally,Sepna offer our customer 1-2pcs or 50-100g free samples for quality testing.

3.Q:How to be Sepna’s distributor ?

A: As the growing of Sepna’s global business,we need to find more and more distributors and agents
worldwide.Sepna will provide the best solution and service for our partners.
For more information,pls contact our salesperson or call us:+86-400-882-1323

4.Q:Any OEM service ?

A: Yes. Sepna can offer the customer OEM label service,and will give the protection of the your right in your market.

5.Q:Do you have MOQ ?

A:Yes.Normally,MOQ is 2000pcs or 1000kgs.