PU Grouting Injection Packer for High Pressure Machine
Specifications
Injection Packer | Diameter * Length |
A8 | 13mm*80mm |
C8 | 10mm*80mm |
A10 | 13mm*100mm |
C10 | 10mm*100mm |
High pressure injection packer is the use of loop pressure fastening principle. The head is provided with a one-way valve, can prevent the slurry at high pressure into the pour spout.
Injection Method Statement
Feather
Endurable in high pressure, good waterproof effect, stable quality, convenient operation.
Characteristics
Remark
When injecting tight cracks, we have found high success rates by drilling straight into the crack to a depth of 2/3 the thickness of the wall (always measure and tape your drill bit for depth). High pressures can be maintained with virtually no spalding blow-outs (as opposed to angle drilling) and excellent grout penetration. Space the packers every 2.5 - 3 inches and a depth of 5 inches for an 8 inch thick residential wall. Use a low viscosity resin such as Leak-Proof polyurethane foam to assure 100% penetration.
https://www.facebook.com/Nervia.tw/
http://www.urain.com.tw/en/index.php