PT100 module rtd temperature transmitter transmitter
The isolated HART intelligent temperature transmitter (round card) is used for the signal input of resistance temperature detector (RTD) and thermocouple (TC) and 4 - 20mA analog output of the two-wire system, and can be installed in the sensor(Form B) through the HART protocol configuration.
Technical Parameter
Input |
|
Input signal |
Resistance temperature detector (RTD) and thermocouple (TC) |
Cold-junction compensation temperature scope |
-20 -60℃ |
Compensation precision |
±1℃ |
Output |
|
Output signal |
4-20mA, overlaid HART protocol |
Load resistance |
RL≤(Ue-12)/0.021 |
Output current of upper and lower limit overflow alarm |
IH=21mA, IL=3.8mA |
Output current of input disconnection alarm |
Settable |
Power supply |
|
Supply voltage |
DC12-40V |
Other parameters |
|
Transmission precision (20℃) |
0.1%FS |
Temperature drift |
0.0075%FS/℃ |
Response time |
Reach to 90% of the final value for700ms |
Used environmental temperature |
-40 - 80℃ |
Storage temperature |
-40 - 100℃ |
Insulation strength (between input and output) |
1500Vrms (1 min, without spark) |
Insulation resistance (between input and output) |
≥100MΩ(under the 500 VDC) |
Condensation |
Allowable |
Protection level |
IP00; IP66 (installation) |
Aseismicity |
4g/2 - 150Hz |
Installation angle |
Unlimited |
Installation area |
B-type top cassette installation |
Electromagnetic compatibility |
Conform to GB/T18268 industrial equipment application requirements (IEC 61326-1) |
Q:How long will you get our reply?
A: We will contact you as soon as possible but within 12 hours once getting your inquiry.Whatsapp:+86-15052699328; Website: www.bcstgroup.com
Q:Could I get samples?
A:Yes, samples are available.
Q: What certificates do we have ?
A:We have the certification of ISO,CE, SIL2, SGS etc.,we could send them to you by email.
Q:How is the price?
A:As we believe the quality is the most important,we will provide the best quality with moderate price.
Q:Could you provide me the shortest lead time?
A:We have inventory for standard models. Pls tell me your detailed requirements, we will send to you as early as we can.
Q:Could I visit your factory?
A:Welcome! our factory is located in Jinhu, Jiangsu province, China.
Q: How soon can you arrange the production?
A: Once getting your product confirmation and receiving your payment, we will arrange the production immediately.
Q: What are your brand names for international market?
A: BCST is the brand for our international marketing.
Contact Information
Emily Xu
BCST GROUP
Flow,Pressure,Level ,Temperature Instrument Manufacturer
Add: 288#,Tongtai road , Jinhu Indutrial Park , Huai'an,Jiangsu
Tel: 0086-517-86989565 Fax:0086-517-86980638
Skype:emilyxyd Whatsapp:008615052699328