PS foam sheet extrusion line (HR-105/120)
PS foam sheet extrusion line (HR-105/120)
PS Foam Sheet Extrusion Line adopts Gentian type double-stage series high foam technology. The raw material is general polystyrene granule. In the extruding process, vesicant is injected at high pressure. After extruding, foaming, cooling, shaping and hauling off, it is winding to finished PS foam sheet rolls. After vacuum forming system, the finished PS foaming sheet can be made into variety of packaging vessels such as fast food box ,aquatic plate, supermarket tray ,cake tray , KT board ,instant noodle bowl ,foam tray etc. It is widely used in the packing for food, fruit, and advertising industrial products and so on. This equipment adopts high speed hydraulic filter changer which has steady feature, can realize change the filter immediately without stopping the machine. The foaming shaping machine adopts PLC control, touch screen operation, easily to operate.
Technical Parameters
Model | HR-75 / 90 | HR-105 / 120 | HR-120 / 150 |
Extruder | 75 / 90 | 105 / 120 | 120 / 150 |
Foaming rate | 20-30 | 20-30 | 20-30 |
Width of sheet | 640 | 640-1040mm | 640-1200mm |
Cutting mode | Single or double cutting | Single or double cutting | Single or double cutting |
Thickness of sheet | 1.0-2.0mm | 1.0-3.5mm | 2.0-5.0mm |
Cooling mode | Wind or water cooling | Wind or water cooling | Wind or water cooling |
Installed power | 120kw | 150kw | 260kw |
Installation dimension | 26000*4000*2800 | 30000*4100*2800mm | 38000*4200*3200mm |
Total weight | 10T | 12T | 18T |
What is the features of our High Output PS foam sheet plastic extrusion line ?
1.low cost,light weight,good rigidity,wide use
2.heat preservation,waterproof.
3.resist high temperature,prevent oil
4.renewable resources
5.as the Soilless cultivation
For making PS foam food container, it includes the following machine:
1- PS foam sheet extrusion line
2- Full auotmatic vacuum forming & cutting machine
3- PS crusher and recycling machine
1. PS foam sheet extrusion line
PS Foam Sheet Extruder uses a tandem screw technology to
produce fine-block cell-structured extruded polystyrene foam
sheet with high strength and a pearl and even surface, in a
continuous roll, from polystyrene injection an eco-friendly
blowing gas and additives. It has a user friendly operating system
with inverter controlled driving, digital temperature control and so
on.
2. Full automatic vacuum forming & cutting machine
Fully automatic forming and cutting machine integrates forming,
cutting and stacking (trimming) at the same time. It has the features
of saving labor, improving efficient, lowing labor intensity and
reducing production cost. It adopts PLC controller and touch
screen to control the working program. Two workers are enough
for whole production line.
The machine is plastic sheet forming equipment in one step with
following process: transporting sheet, heating, forming, cutting,
stacking and winding waste edge.
3. PS crusher and recycling machine
PS crusher and recycling machine is designed to reclaim the
foamed polystyrene materials almost identically to new ones with
its own superior filtering performance.
Sample picture as following:
Our Factory photos
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier